freesewing/markdown/org/docs/patterns/bent/instructions/fr.md

- - -
title: "Bent body Block: Sewing Instructions"
- - -

<Note>

###### Bent is a block, not a pattern

A block is a basic shape on which other patterns are based.
Ils sont parfois aussi appelés patrons de base, bien que les puristes soutiennent qu'un bloc et un patron de base sont des choses différentes.

Blocks are typically not made as-is but rather serve as a basis for other patterns so the instructions below will not go in depth about closures or finishes and are for the default Bent block.

</Note>

<Warning>

As Bent is a block it does not have any closures. So the instructions below will explain how to make a Bent with a seam down the centre front so you can pin yourself into it.

</Warning>

### Etape 1 : Construction de la maquette

- Sew the fronts to the back at the shoulder seams good sides together.
- Sew the fronts to the back at the side seams good sides together.
- Sew the under sleeves to the top sleeves good sides together along the side seams.
- Attach the sleeves to the body, good sides together and sew them in the round.

<Note>

You may need to ease/gather the sleeves to fit.

You may need to ease/gather the sleeves to fit.\
You may need to leave the bottom of one of the sleeve seams open to put the garment on.

</Note>
<Tip>

If you are making adjustments you may wish to sew the seams wrong sides together to make them easier to adjust.

</Tip>

### Étape 2 : Essayez-le

- Try it on and check the fit by pinning the front closed whilst wearing it.
- Apportez les modifications nécessaires et essayez à nouveau le vêtement.
- Répétez l'opération jusqu'à ce que vous soyez satisfait.

<Tip>

If you do not have someone to help with pinning alterations, you can use a dressform to pin any alterations that are hard to do on person. Just remember to try it on after to make sure it fits you.

Keep an eye out for anything you keep doing whilst wearing the mock-up, are you pulling it down? Ajuster constamment l'épaule ? ect... Ces éléments sont des signes indiquant que le modèle doit être ajusté.

Il est parfois nécessaire de porter la maquette pendant un certain temps pour avoir une meilleure idée de la coupe, alors n'hésitez pas à vous promener avec pendant quelques heures.

</Tip>
<Note>

Remember to treat Bent as a basis rather than a final product, so adjust what you need to get the desired look.  
For instance:

- Change the neck line
- Add/change the closure allowances
- Alter the hem style
- Add a collar

It is all up to you! Expérimentez et allez-y !

</Note>

### Étape 3 : Créer un modèle en papier

- Once happy with all your changes unpick your mockup and make a paper pattern based off of it.
- Now you have a pattern you can use to produce a garment.

<Note>

It is best practice to make a paper pattern from the mock-up if you have made any alterations, as this will allow you to clean up any lines but also means you have a pattern that you can keep producing garments from.

</Note>

### Bent is a block, looking for a finalised pattern?

> Here are some of the patterns based on Bent: [Carlton](/patterns/carlton), [Carlita](/patterns/carlita), and [Jaeger](/patterns/jaeger).