freesewing/markdown/org/docs/measurements/hpstobust/en.md

---
title: HPS to bust
---

<Note>

###### HPS: high point shoulder

The _high point shoulder_ or _HPS_ point is used as the base for several vertical measurements.
Refer to [the hps documentation](/docs/sewing/hps/) for information on how to locate this point.

</Note>

The **high point shoulder (HPS) to bust** measurement runs from your HPS down to the line that forms your bust span.

To measure your HPS to bust, first [localize your HPS point](/docs/sewing/hps/).
Then measure straight down to the line that forms your chest circumference/bust span.

The point of this measurement is to locate the fullest part of your bust vertically on your torso.

<Tip>

##### Think about which hand you're using

If you measure yourself, you might try to hold your measuring tape up to your shoulder with the hand on
the same side of your body as the shoulder you're measuring. So, for example, you could be holding the top of
the tape up to your right shoulder with your right hand, while your left hand is holding the end.
But that means you distort the length you are trying to measure by raising your arm on the same side.
You might not think there is a difference, but all is connected in the world of physiology, and
doing this could lead to an error of ~2.5cm (~1 inch) in your measurement.  
Simply switch your hands around, and you get a more accurate measurement.

For best results, get a second person to take your measurements (if possible).

</Tip>
<MeasieImage />