freesewing/designs/bella/i18n/en.json

{
  "t": "Bella body block",
  "d": "Bella is a basic body block for people with breasts.",
  "p": {
    "back": "Back",
    "frontSideDart": "Front"
  },
  "s": {
    "cbSeamBustBelowWaist.t": "Bust height compromised at center back",
    "cbSeamBustBelowWaist.d": "No solution was found to place the bust point above the waist line on the center back seam. As a compromise, we've used the waist height instead. \n\nPlease verify your measurements before contacting support.",
    "sideSeamBustBelowWaist.t": "Bust height compromised at side seam",
    "sideSeamBustBelowWaist.d": "No solution was found to place the bust point above the waist line on the side seam. As a compromise, we've used the waist height instead. \n\nPlease verify your measurements before contacting support.",
    "bustDartCompromise.t": "Bust dart tip compromised",
    "bustDartCompromise.d": "No solution was found to adjust the bust dart. As a compromise we are using the bust draft as initially drafted.\n\nPlease verify your measurements before contacting support."
  },
  "o": {
    "chestEase": {
      "t": "Chest ease",
      "d": "Controls the amount of ease at the fullest part of your chest"
    },
    "waistEase": {
      "t": "Waist ease",
      "d": "Controls the amount of ease at your waist"
    },
    "bustSpanEase": {
      "t": "Bust span ease",
      "d": "Controls the amount of (horizontal) ease added to your bust span when locating the bust point."
    },
    "shoulderToShoulderEase": {
      "t": "Shoulder to Shoulder ease",
      "d": "Controls the amount of ease between your shoulders. Initially set to -.5% because Bella implements a block that is used in the industry."
    },
    "fullChestEaseReduction": {
      "t": "Full chest ease reduction",
      "d": "Allows you to independently reduce the ease around the chest to make it fit tight(er) in that area"
    },
    "backDartHeight": {
      "t": "Back dart height",
      "d": "Controls the height of the back dart"
    },
    "bustDartLength": {
      "t": "Bust dart length",
      "d": "Controls the length of the bust dart"
    },
    "waistDartLength": {
      "t": "Waist dart length",
      "d": "Controls the length of the waist dart"
    },
    "bustDartCurve": {
      "t": "Bust dart curve",
      "d": "Controls the curvature of the bust dart"
    },
    "armholeDepth": {
      "t": "Armhole depth",
      "d": "Controls the depth of the armhole"
    },
    "backArmholeSlant": {
      "t": "Back armhole slant",
      "d": "Slightly rotates the armhole around its pitch point"
    },
    "frontArmholeCurvature": {
      "t": "Front armhole curvature",
      "d": "Controls how deep the armhole is scooped out at the front bottom"
    },
    "backArmholeCurvature": {
      "t": "Back armhole curvature",
      "d": "Controls how deep the armhole is scooped out at the back bottom"
    },
    "frontArmholePitchDepth": {
      "t": "Front armhole pitch depth",
      "d": "Tweaks the horizontal placement of the front armhole pitch point"
    },
    "backArmholePitchDepth": {
      "t": "Back armhole pitch depth",
      "d": "Tweaks the horizontal placement of the back armhole pitch point"
    },
    "backNeckCutout": {
      "t": "Back neck cutout",
      "d": "Controls how deep the neck opening is scooped out at at the back"
    },
    "backHemSlope": {
      "t": "Back hem slope",
      "d": "Controls the slope of the hem at the back"
    },
    "frontShoulderWidth": {
      "t": "Front shoulder width",
      "d": "Controls the narrowness of the front shoulders relative to the back"
    },
    "highBustWidth": {
      "t": "High bust width",
      "d": "Allows you to tweak the hight bust width at the front"
    }
  }
}