New translations en.md (Ukrainian)

markdown/org/docs/patterns/breanna/instructions/uk.md

@@ -0,0 +1,76 @@
+- - -
+title: "Breanna body block: Sewing Instructions"
+- - -
+
+<Note>
+
+###### Breanna is a block, not a pattern
+
+A block is a basic shape on which other patterns are based.
+They are sometimes also called slopers, although purists will argue that a block and a sloper are different things.
+
+Blocks are typically not made as-is but rather serve as a basis for other patterns so the instructions below will not go in depth about closures or finishes and are for the default Breanna block.
+
+</Note>
+
+### Step 1: Mock-up Construction
+
+- Close the front darts.
+- Close the back darts.
+- Sew the front to the backs at the shoulders _good sides together_.
+- Matching notches, sew the sleeves to the shoulder _good sides together_.
+- Sew the side seams _good sides together_.
+
+<Note>
+
+You may need to leave the bottom of sleeve side seams open to put the garment on.
+
+</Note>
+
+<Tip>
+
+If you are making adjustments you may wish to sew the seams _wrong sides together_ to make them easier to adjust.
+
+</Tip>
+
+### Step 2: Try it on
+
+- Try it on and check the fit by pinning the back closed whilst wearing it.
+- Make any alterations and try it on again.
+- Repeat until you are happy.
+
+<Tip>
+
+If you do not have someone to help with pinning, you may find it easier to cut the front part in two with seam allowance rather than on a fold and sew the back seam up so that you can pin in the front when trying on.
+
+Keep an eye out for anything you keep doing whilst wearing the mock-up, are you pulling it down? Constantly adjusting the shoulder? etc. Things like these are signs of where the pattern may need adjusting.
+
+Sometimes you may need to wear the mock-up for an extended amount of time to get a better sense of the fit so don't be afraid to walk around in it for a couple of hours.
+
+</Tip>
+
+<Note>
+
+Remember to treat Breanna as a basis rather than a final product, so adjust what you need to get the desired look.\
+For instance:
+
+- Change the neck line
+- Add/change the closure allowances
+- Alter the dart placements
+- Add a collar
+
+It is all up to you! Experiment and go forth!
+
+</Note>
+
+### Step 3: Make a paper pattern
+
+- Once happy with all your changes unpick your mockup and make a paper pattern based off of it.
+- Now you have a pattern you can use to produce a garment.
+
+<Note>
+
+It is best practice to make a paper pattern from the mock-up if you have made any alterations, as this will allow you to clean up any lines but also means you have a pattern that you can keep producing garments from.
+
+</Note>
+