New translations en.md (Ukrainian)

markdown/org/docs/patterns/bob/instructions/uk.md

@@ -0,0 +1,51 @@
+---
+title: "Bob the Bib: Sewing Instructions"
+---
+
+<Note>
+
+#### Before we start: One layer or two?
+
+First thing you need to figure out is whether you're going to make a 1-layer (simple) bib,
+or do you want to make one out of two layers.
+
+A two-layer bib gives you more options, as you can use an absorbent backing layer like
+terrycloth, yet still have the entire cotton selection of your local fabric store available
+as your choice for the front layer, aka the visible one.
+
+</Note>
+
+## Step 1: Optional: Join layers
+
+If you decide to go for two layers, simply join them together at the edges before applying the bias tape.
+
+You probably want to pin or bast this prior to sewing. The two different types of fabric will behave differently, so secure them in place prior to sewing the together.
+
+Make sure to sew close to the edge so that the stitches will be under the bias tape finish later.
+
+
+## Step 2: Apply bias tape
+
+Wer're going to apply bias tape as a finish around the entire edge of the bib.
+
+You probably want to start at the bottom strap, as this way the joint of the bias seam will be covered when the bib is worn.
+
+Just work your way around, and take your time.
+
+<Fixme>
+
+Provide generic instructions for sewing bias tape
+
+</Fixme>
+
+## Step 3: Install snaps or button
+
+Next, install the snaps on the straps, as indicated on the pattern.
+
+If you don't have or want snaps, you can also use a button + buttonhole.
+
+
+## Step 4: You're done!
+
+That was easy 😃
+