1
0
Fork 0

Update source file en.md

skip-build
This commit is contained in:
Joost De Cock 2024-02-10 19:30:48 +01:00
parent 2b8210bae4
commit 7404a830ff

View file

@ -245,12 +245,16 @@ So make sure to align the notches. It's what they're there for.
In order to look real crisp, the collar should be symmetrical on both sides.
About 5mm difference is already visible to a collar, so the more precise you do these steps, the better.
### Add markings to both collars
But both collars on top of each other, baste the corners together and cut the basting.
### Add markings to both collar and undercollar
Put the collar and undercollar on top of each other, baste the corners together and cut the basting.
Then use a marking pencil or some chalk to mark the edges of the collar.
Measure 2 times to make sure the remaining collars and the location of the corners are 100% identical on both corners
![Mark the collar Edges](collarMarkings.svg)
<Note compact>
The undercollar's shape is that of the collar and collarstand parts
combined.
</Note>
#### Add interfacing or canvas to the outside collar stand and under collar
Either use a fusible interfacing, or, if you want to be hardcore use a horsehair canvas.
@ -269,7 +273,7 @@ Cut the seam allowance in the corners diagonally for a better fit
### Sleeves
Sew the uppersleeve to the undersleeve until the split
#### Create the split at the eng of the sleeve
#### Create the split at the end of the sleeve
Sew the other side of the sleeves
Turn the sleeves with the good side out