chore: Remove designs
This commit is contained in:
joostdecock
parent
3ca8ac4c2a
commit
db63870415
2599 changed files with 122 additions and 314207 deletions
|
|
@ -1,11 +1,18 @@
|
|||
---
|
||||
title: "Armhole depth"
|
||||
title: 'Armhole depth'
|
||||
sidebar_class_name: hidden
|
||||
---
|
||||
|
||||
This option controls the depth of the armhole in the Brian block Aaron is based on.
|
||||
This option controls the depth of the armhole in the Brian block Aaron is based
|
||||
on.
|
||||
|
||||
This option applies to the new v3 way of calculating the armhole depth.
|
||||
If you enable the [legacy armhole depth](/docs/designs/brian/options/legacyarmholedepth) option, this option will not apply, but instead it's legacy version [armhole depth factor](/docs/designs/brian/options/armholedepthfactor) will.
|
||||
This option applies to the new v3 way of calculating the armhole depth. If you
|
||||
enable the [legacy armhole
|
||||
depth](/docs/designs/brian/options/legacyarmholedepth) option, this option will
|
||||
not apply, but instead it's legacy version [armhole depth
|
||||
factor](/docs/designs/brian/options/armholedepthfactor) will.
|
||||
|
||||
In any case, Aaron allows the armhole to drop much further using the [armhole drop](/docs/designs/aaron/options/armholedrop) option.
|
||||
So you probably don't need this option from the underlying block, but it's there if you'd like to tweak it.
|
||||
In any case, Aaron allows the armhole to drop much further using the [armhole
|
||||
drop](/docs/designs/aaron/options/armholedrop) option. So you probably don't
|
||||
need this option from the underlying block, but it's there if you'd like to
|
||||
tweak it.
|
||||
|
|
|
|||
|
|
@ -1,16 +0,0 @@
|
|||
---
|
||||
title: Binding width
|
||||
---
|
||||
|
||||
Controls the width of the knit binding on Aaron.
|
||||
|
||||
The default knit binding width is 6 x the seam allowance.
|
||||
For metric users with the default 1cm seam allowance, this results in a 1.5cm wide knit binding which is a good value.
|
||||
|
||||
For imperial users (who have a default seam allowance of 0.5") or users who choose to use a larger seam allowance, the value of 6 time the seam allowance will probable result in a knit binding that it too wide, so this option allows you to control that.
|
||||
|
||||
:::note
|
||||
|
||||
|
||||
This option is expressed in percentage of the seam allowance. So the default is 600%, or 6 time the seam allowance.
|
||||
:::
|
||||
|
|
@ -1,5 +1,19 @@
|
|||
---
|
||||
title: "Knit Binding Width"
|
||||
title: Knit binding width
|
||||
---
|
||||
|
||||
This option controls the width of the knit binding.
|
||||
Controls the width of the knit binding on Aaron.
|
||||
|
||||
The default knit binding width is 6 x the seam allowance. For metric users
|
||||
with the default 1cm seam allowance, this results in a 1.5cm wide knit binding
|
||||
which is a good value.
|
||||
|
||||
For imperial users (who have a default seam allowance of 0.5") or users who
|
||||
choose to use a larger seam allowance, the value of 6 time the seam allowance
|
||||
will probable result in a knit binding that it too wide, so this option allows
|
||||
you to control that.
|
||||
|
||||
:::note
|
||||
This option is expressed in percentage of the seam allowance. So the default is
|
||||
600%, or 6 time the seam allowance.
|
||||
:::
|
||||
|
|
|
|||
|
|
@ -4,4 +4,77 @@ sidebar_label: Design Options
|
|||
sidebar_position: 10
|
||||
---
|
||||
|
||||
<ReadMore />
|
||||
import Armholedepth from '@site/docs/designs/aaron/options/armholedepth/readme.mdx'
|
||||
import Armholedrop from '@site/docs/designs/aaron/options/armholedrop/readme.mdx'
|
||||
import Backlinebend from '@site/docs/designs/aaron/options/backlinebend/readme.mdx'
|
||||
import Chestease from '@site/docs/designs/aaron/options/chestease/readme.mdx'
|
||||
import Draftforhighbust from '@site/docs/designs/aaron/options/draftforhighbust/readme.mdx'
|
||||
import Hipsease from '@site/docs/designs/aaron/options/hipsease/readme.mdx'
|
||||
import Knitbindingwidth from '@site/docs/designs/aaron/options/knitbindingwidth/readme.mdx'
|
||||
import Legacyarmholedepth from '@site/docs/designs/aaron/options/legacyarmholedepth/readme.mdx'
|
||||
import Lengthbonus from '@site/docs/designs/aaron/options/lengthbonus/readme.mdx'
|
||||
import Necklinebend from '@site/docs/designs/aaron/options/necklinebend/readme.mdx'
|
||||
import Necklinedrop from '@site/docs/designs/aaron/options/necklinedrop/readme.mdx'
|
||||
import Shoulderstrapplacement from '@site/docs/designs/aaron/options/shoulderstrapplacement/readme.mdx'
|
||||
import Shoulderstrapwidth from '@site/docs/designs/aaron/options/shoulderstrapwidth/readme.mdx'
|
||||
import Stretchfactor from '@site/docs/designs/aaron/options/stretchfactor/readme.mdx'
|
||||
|
||||
## Fit
|
||||
|
||||
### Armhole depth {#armholedepth}
|
||||
|
||||
<Armholedepth />
|
||||
|
||||
### Chest ease {#chestease}
|
||||
|
||||
<Chestease />
|
||||
|
||||
### Draft for high bust {#draftforhighbust}
|
||||
|
||||
<Draftforhighbust />
|
||||
|
||||
### Hips ease {#hipsease}
|
||||
|
||||
<Hipsease />
|
||||
|
||||
### Stretch {#stretchfactor}
|
||||
|
||||
<Stretchfactor />
|
||||
|
||||
## Style
|
||||
|
||||
### Armhole drop {#armholedrop}
|
||||
|
||||
<Armholedrop />
|
||||
|
||||
### Back armhole shape {#backlinebend}
|
||||
|
||||
<Backlinebend />
|
||||
|
||||
### Knit binding width {#knitbindingwidth}
|
||||
|
||||
<Knitbindingwidth />
|
||||
|
||||
### Legacy armhole depth {#legacyarmholedepth}
|
||||
|
||||
<Legacyarmholedepth />
|
||||
|
||||
### Length bonus {#lengthbonus}
|
||||
|
||||
<Lengthbonus />
|
||||
|
||||
### Neckine shape {#necklineshape}
|
||||
|
||||
<Necklinebend />
|
||||
|
||||
### Neckline drop {#necklinedrop}
|
||||
|
||||
<Necklinedrop />
|
||||
|
||||
### Shoulderstrap placement {#shoulderstrapplacement}
|
||||
|
||||
<Shoulderstrapplacement />
|
||||
|
||||
### Shoulderstrap width {#shoulderstrapwidth}
|
||||
|
||||
<Shoulderstrapwidth />
|
||||
|
|
|
|||
Binary file not shown.
|
Before Width: | Height: | Size: 1.5 MiB |
|
|
@ -1,59 +0,0 @@
|
|||
---
|
||||
title: 'Albert apron: Sewing Instructions'
|
||||
sidebar_label: Sewing Instructions
|
||||
sidebar_position: 20
|
||||
---
|
||||
|
||||
### Step 1: The Pocket
|
||||
|
||||
- Along the top of the pocket fold the seam allowance to wrong side, press.
|
||||
- Then fold the top hem allowance to wrong side and press, making sure the seam allowance is tucked underneath. Pin in place if you need to.
|
||||
- Press the seam allowance of the sides and bottom to the wrong side.
|
||||
- On the right side topstich close to where the hem edge lies underneath, making sure to catch the hem and seam allowances as you sew.
|
||||
- Pin the pocket to the front using the guides.
|
||||
- _Edgestitch_ the sides and bottom of the pocket leaving the top open. Make sure to backstitch at the start and end to secure the pocket properly.
|
||||
|
||||
:::tip
|
||||
|
||||
If you have trouble catching the top hem we suggest to either _Baste_ close to the hem edge first, and use that as a guide when stitching on the right side or pin the hem edge down from the right side making sure the pins are parallel to the top edge and use them as a guide.
|
||||
|
||||
:::
|
||||
|
||||
:::note
|
||||
|
||||
There are multiple ways to sew a patch pocket so use the way you prefer if you do not like this one.
|
||||
A fun thing you can do is embroider/stitch the pocket with the name of the person the apron is for or even a cute design. Just remember that aprons typically get dirty so don't go to overtop with it.
|
||||
|
||||
:::
|
||||
|
||||
### Step 2: The Front
|
||||
|
||||
- Press under the side seam allowances to the wrong side.
|
||||
- Press under the side seams to the wrong side along the hem lines making sure the seam allowances are tucked underneath.
|
||||
- On the right side topstich close to where the folded edges lie underneath, making sure to catch the hems as you sew.
|
||||
- Repeat Step 2 for the top and bottom hems.
|
||||
|
||||
:::note
|
||||
|
||||
It is recommended to hem the side seams before the top and bottom seams as they are narrower.
|
||||
The side seams are narrow hems simply being the seam allowance folded over twice.
|
||||
|
||||
:::
|
||||
|
||||
### Step 3: The Straps
|
||||
|
||||
- Fold one strap in half, right sides together and sew the top and side together.
|
||||
- Turn inside out through the bottom. Press.
|
||||
- Using the cross and rectangle as a guide, stitch the top of the strap to the wrong side of the front on the top left.
|
||||
- Using the cross and rectangle as a guide, stitch the bottom of the strap to the wrong side of the front at the side right.
|
||||
- Repeat Step 3 for the remaining strap attaching it at the top right and then the side left.
|
||||
|
||||
:::note
|
||||
|
||||
You can make another set of straps to tie at the back if you wish to keep the apron close to body when moving.
|
||||
|
||||
:::
|
||||
|
||||
### Step 4: Enjoy!
|
||||
|
||||
You're done! Now go enjoy your apron and make every stain a memory!
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 28 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 30 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 96 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 48 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 49 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 103 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 100 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 79 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 51 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 55 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 80 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 77 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 44 KiB |
|
|
@ -1,9 +0,0 @@
|
|||
---
|
||||
title: "Back opening"
|
||||
---
|
||||
|
||||
Controls the amount of opening at the back of your apron.
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,9 +0,0 @@
|
|||
---
|
||||
title: "Bib length"
|
||||
---
|
||||
|
||||
Controls the length of the _bib_ part of your apron.
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,9 +0,0 @@
|
|||
---
|
||||
title: "Bib width"
|
||||
---
|
||||
|
||||
Controls the width of the _bib_ part of your apron.
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,9 +0,0 @@
|
|||
---
|
||||
title: "Strap length"
|
||||
---
|
||||
|
||||
Controls the length of the straps on your apron.
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,177 +0,0 @@
|
|||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<svg
|
||||
xmlns:dc="http://purl.org/dc/elements/1.1/"
|
||||
xmlns:cc="http://creativecommons.org/ns#"
|
||||
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
|
||||
xmlns:svg="http://www.w3.org/2000/svg"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
|
||||
xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
|
||||
viewbox="0 0 500 718"
|
||||
id="svg2898"
|
||||
version="1.1"
|
||||
inkscape:version="0.47 r22583"
|
||||
width="980.466"
|
||||
height="805.342"
|
||||
sodipodi:docname="shoulderstrapplacement.svg">
|
||||
<metadata
|
||||
id="metadata2924">
|
||||
<rdf:RDF>
|
||||
<cc:Work
|
||||
rdf:about="">
|
||||
<dc:format>image/svg+xml</dc:format>
|
||||
<dc:type
|
||||
rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
|
||||
<dc:title></dc:title>
|
||||
</cc:Work>
|
||||
</rdf:RDF>
|
||||
</metadata>
|
||||
<defs
|
||||
id="defs2922" />
|
||||
<sodipodi:namedview
|
||||
pagecolor="#ffffff"
|
||||
bordercolor="#666666"
|
||||
borderopacity="1"
|
||||
objecttolerance="10"
|
||||
gridtolerance="10"
|
||||
guidetolerance="10"
|
||||
inkscape:pageopacity="0"
|
||||
inkscape:pageshadow="2"
|
||||
inkscape:window-width="1832"
|
||||
inkscape:window-height="1057"
|
||||
id="namedview2920"
|
||||
showgrid="false"
|
||||
inkscape:zoom="0.478923"
|
||||
inkscape:cx="408.792"
|
||||
inkscape:cy="354.236"
|
||||
inkscape:window-x="-8"
|
||||
inkscape:window-y="-8"
|
||||
inkscape:window-maximized="0"
|
||||
inkscape:current-layer="svg2898" />
|
||||
<style
|
||||
type="text/css"
|
||||
id="style2900">
|
||||
path{fill:#663f95;fill-opacity:1;stroke:#292b2c;stroke-width:4;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:1;"}
|
||||
path.sm{stroke-width:2;}
|
||||
path.back{fill:#86739c;}
|
||||
</style>
|
||||
<g
|
||||
id="g5546">
|
||||
<g
|
||||
style="fill:#212121"
|
||||
transform="translate(-15.8115,-0.280585)"
|
||||
id="g2946">
|
||||
<path
|
||||
sodipodi:nodetypes="ccccccccccccssc"
|
||||
style="fill:#212121;stroke:#babdb6"
|
||||
d="M 143.41,0.780585 103.193,8.29538 C 124.162,120.783 113.832,233.252 18.7644,233.252 18.7644,233.252 32.4473,414.992 32.4473,505.86 L 32.4473,715.552 251.08,715.552 251.089,715.552 469.722,715.552 469.722,505.86 C 469.722,414.992 490.778,233.252 490.778,233.252 395.71,233.252 378.007,120.783 398.976,8.29538 L 358.75,0.780585 C 332.289,142.723 337.785,142.732 251.089,142.732 251.086,142.732 251.083,142.732 251.08,142.732 164.384,142.732 169.871,142.723 143.41,0.780585 z"
|
||||
id="path2948" />
|
||||
<path
|
||||
sodipodi:nodetypes="ccccccccccccssc"
|
||||
style="fill:#8e8e8e"
|
||||
d="M 142.887,2.00905 102.66,9.51482 C 128.693,148.997 106.691,234.481 18.241,234.481 18.241,234.481 31.9148,416.212 31.9148,507.079 L 31.9148,716.772 250.548,716.772 250.566,716.772 469.198,716.772 469.198,507.079 C 469.198,416.212 485.825,234.481 485.825,234.481 397.375,234.481 372.42,148.997 398.453,9.51482 L 358.227,2.00905 C 353.211,28.8778 312.147,28.8747 250.566,28.8747 250.559,28.8747 250.554,28.8747 250.548,28.8747 188.966,28.8747 147.902,28.8778 142.887,2.00905 z"
|
||||
class="back"
|
||||
id="path2950" />
|
||||
<path
|
||||
d="M 143.41,0.780585 127.839,3.68596 C 134.754,44.6368 153.004,44.9888 255.155,44.9888 357.307,44.9888 366.353,43.5871 373.816,3.59168 L 358.75,0.780585 C 353.734,27.6493 312.67,27.6462 251.089,27.6462 251.083,27.6462 251.077,27.6462 251.071,27.6462 189.49,27.6462 148.426,27.6493 143.41,0.780585 z"
|
||||
style="fill:#545454;fill-opacity:1;stroke:none"
|
||||
class="sm"
|
||||
id="path2952" />
|
||||
<path
|
||||
sodipodi:nodetypes="ccccccccccssc"
|
||||
style="fill:#212121"
|
||||
d="M 143.41,0.780585 103.193,8.29538 C 124.162,120.783 112.356,233.252 17.288,233.252 17.288,233.252 32.4473,414.992 32.4473,505.86 L 32.4473,715.552 C 178.206,745.575 323.964,740.554 469.722,715.552 L 469.722,505.86 C 469.722,414.992 489.302,233.252 489.302,233.252 394.234,233.252 378.007,120.783 398.976,8.29538 L 358.75,0.780585 C 332.289,142.723 337.785,142.732 251.089,142.732 251.086,142.732 251.083,142.732 251.08,142.732 164.384,142.732 169.871,142.723 143.41,0.780585 z"
|
||||
class="sm"
|
||||
id="path2954" />
|
||||
<path
|
||||
sodipodi:nodetypes="ccccc"
|
||||
style="fill:#545454"
|
||||
d="M 490.778,233.252 C 395.71,233.252 378.007,120.783 398.976,8.29538 L 383.011,5.31292 C 359.49,130.911 383.712,249.215 488.52,249.215 489.469,243.49 490.064,238.276 490.778,233.252 z"
|
||||
class="sm"
|
||||
id="path2956" />
|
||||
<path
|
||||
sodipodi:nodetypes="ccccc"
|
||||
style="fill:#545454"
|
||||
d="M 15.8115,233.252 C 110.879,233.252 124.153,120.783 103.184,8.29538 L 119.149,5.31292 C 142.67,130.911 122.877,249.215 18.0691,249.215 17.1201,243.49 16.5247,238.276 15.8115,233.252 z"
|
||||
class="sm"
|
||||
id="path2958" />
|
||||
<path
|
||||
style="fill:#212121"
|
||||
d="M 33.1542,698.741 467.998,698.741"
|
||||
class="sm"
|
||||
id="path2960" />
|
||||
<path
|
||||
style="fill:#545454"
|
||||
d="M 143.41,0.780585 128.025,3.65542 C 154.425,168.255 158.429,159.109 251.699,159.109 344.969,159.109 354.171,158.981 372.969,3.43697 L 358.75,0.780585 C 332.289,142.723 337.785,142.732 251.089,142.732 251.086,142.732 251.083,142.732 251.08,142.732 164.384,142.732 169.871,142.723 143.41,0.780585 z"
|
||||
class="sm"
|
||||
id="path2962" />
|
||||
</g>
|
||||
<path
|
||||
sodipodi:nodetypes="cc"
|
||||
id="path3772"
|
||||
d="M 18.5875,692.942 C 164.403,717.189 305.525,716.018 451.335,692.942"
|
||||
style="fill:none;stroke:#545454;stroke-width:4;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0" />
|
||||
</g>
|
||||
<g
|
||||
style="fill:#212121"
|
||||
transform="translate(489.489,-0.280585)"
|
||||
id="g5443" />
|
||||
<g
|
||||
id="g5611"
|
||||
transform="translate(505,0)">
|
||||
<g
|
||||
id="g5613"
|
||||
transform="translate(-15.8115,-0.280585)"
|
||||
style="fill:#212121">
|
||||
<path
|
||||
id="path5615"
|
||||
d="M 143.41,0.780585 103.193,8.29538 C 124.162,120.783 113.832,233.252 18.7644,233.252 18.7644,233.252 32.4473,414.992 32.4473,505.86 L 32.4473,715.552 251.08,715.552 251.089,715.552 469.722,715.552 469.722,505.86 C 469.722,414.992 490.778,233.252 490.778,233.252 395.71,233.252 378.007,120.783 398.976,8.29538 L 358.75,0.780585 C 332.289,142.723 337.785,142.732 251.089,142.732 251.086,142.732 251.083,142.732 251.08,142.732 164.384,142.732 169.871,142.723 143.41,0.780585 z"
|
||||
style="fill:#212121;stroke:#babdb6"
|
||||
sodipodi:nodetypes="ccccccccccccssc" />
|
||||
<path
|
||||
id="path5617"
|
||||
class="back"
|
||||
d="M 142.887,2.00905 102.66,9.51482 C 128.693,148.997 106.691,234.481 18.241,234.481 18.241,234.481 31.9148,416.212 31.9148,507.079 L 31.9148,716.772 250.548,716.772 250.566,716.772 469.198,716.772 469.198,507.079 C 469.198,416.212 485.825,234.481 485.825,234.481 397.375,234.481 372.42,148.997 398.453,9.51482 L 358.227,2.00905 C 353.211,28.8778 312.147,28.8747 250.566,28.8747 250.559,28.8747 250.554,28.8747 250.548,28.8747 188.966,28.8747 147.902,28.8778 142.887,2.00905 z"
|
||||
style="fill:#8e8e8e"
|
||||
sodipodi:nodetypes="ccccccccccccssc" />
|
||||
<path
|
||||
id="path5619"
|
||||
class="sm"
|
||||
style="fill:#545454;fill-opacity:1;stroke:none"
|
||||
d="M 143.41,0.780585 127.839,3.68596 C 134.754,44.6368 153.004,44.9888 255.155,44.9888 357.307,44.9888 366.353,43.5871 373.816,3.59168 L 358.75,0.780585 C 353.734,27.6493 312.67,27.6462 251.089,27.6462 251.083,27.6462 251.077,27.6462 251.071,27.6462 189.49,27.6462 148.426,27.6493 143.41,0.780585 z" />
|
||||
<path
|
||||
id="path5621"
|
||||
class="sm"
|
||||
d="M 143.41,0.780585 103.193,8.29538 C 124.162,120.783 112.356,233.252 17.288,233.252 17.288,233.252 32.4473,414.992 32.4473,505.86 L 32.4473,784.945 C 178.206,814.968 323.964,809.947 469.722,784.945 L 469.722,505.86 C 469.722,414.992 489.302,233.252 489.302,233.252 394.234,233.252 378.007,120.783 398.976,8.29538 L 358.75,0.780585 C 332.289,142.723 337.785,142.732 251.089,142.732 251.086,142.732 251.083,142.732 251.08,142.732 164.384,142.732 169.871,142.723 143.41,0.780585 z"
|
||||
style="fill:#212121"
|
||||
sodipodi:nodetypes="ccccccccccssc" />
|
||||
<path
|
||||
id="path5623"
|
||||
class="sm"
|
||||
d="M 490.778,233.252 C 395.71,233.252 378.007,120.783 398.976,8.29538 L 383.011,5.31292 C 359.49,130.911 383.712,249.215 488.52,249.215 489.469,243.49 490.064,238.276 490.778,233.252 z"
|
||||
style="fill:#545454"
|
||||
sodipodi:nodetypes="ccccc" />
|
||||
<path
|
||||
id="path5625"
|
||||
class="sm"
|
||||
d="M 15.8115,233.252 C 110.879,233.252 124.153,120.783 103.184,8.29538 L 119.149,5.31292 C 142.67,130.911 122.877,249.215 18.0691,249.215 17.1201,243.49 16.5247,238.276 15.8115,233.252 z"
|
||||
style="fill:#545454"
|
||||
sodipodi:nodetypes="ccccc" />
|
||||
<path
|
||||
id="path5627"
|
||||
class="sm"
|
||||
d="M 33.1542,698.741 467.998,698.741"
|
||||
style="fill:#212121" />
|
||||
<path
|
||||
id="path5629"
|
||||
class="sm"
|
||||
d="M 143.41,0.780585 128.025,3.65542 C 154.425,168.255 158.429,159.109 251.699,159.109 344.969,159.109 354.171,158.981 372.969,3.43697 L 358.75,0.780585 C 332.289,142.723 337.785,142.732 251.089,142.732 251.086,142.732 251.083,142.732 251.08,142.732 164.384,142.732 169.871,142.723 143.41,0.780585 z"
|
||||
style="fill:#545454" />
|
||||
</g>
|
||||
<path
|
||||
style="fill:none;stroke:#545454;stroke-width:4;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;stroke-dashoffset:0"
|
||||
d="M 18.5875,762.335 C 164.403,786.582 305.525,785.411 451.335,762.335"
|
||||
id="path5631"
|
||||
sodipodi:nodetypes="cc" />
|
||||
</g>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 9.5 KiB |
|
|
@ -1,9 +0,0 @@
|
|||
---
|
||||
title: "Length bonus"
|
||||
---
|
||||
|
||||
How much longer than the default length to make your apron.
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,7 +0,0 @@
|
|||
---
|
||||
title: 'Albert apron: Design Options'
|
||||
sidebar_label: Design Options
|
||||
sidebar_position: 10
|
||||
---
|
||||
|
||||
<ReadMore />
|
||||
|
|
@ -1,9 +0,0 @@
|
|||
---
|
||||
title: "Strap width"
|
||||
---
|
||||
|
||||
Controls the width of the straps on your apron.
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,44 +0,0 @@
|
|||
---
|
||||
title: "Albert: FreeSewing's Albert apron"
|
||||
sidebar_label: Albert apron
|
||||
---
|
||||
|
||||
<DesignInfo design="albert" docs />
|
||||
|
||||
## Designer Notes {#notes}
|
||||
|
||||
Albert was something that I didn't plan on making. My daughter, who's a visual
|
||||
artist, asked if I could make her an apron. Of course, I could not deny her
|
||||
such a request. And since I didn't have a pattern, I needed to make one. And
|
||||
that meant that I could just as well make one for FreeSewing while I was at it.
|
||||
|
||||
The design is simple, since an apron generally is. And yet, where else than at
|
||||
FreeSewing can you get a bespoke apron?
|
||||
|
||||
This is a very good project for a beginning sewist.
|
||||
|
||||
Wouter
|
||||
|
||||
## What You Need {#needs}
|
||||
|
||||
To make Albert, you will need the following:
|
||||
|
||||
- [Basic sewing supplies](/docs/sewing/basic-sewing-supplies)
|
||||
- About 1.25 meters (1.4 yards) (depending on the length of your apron) of a
|
||||
suitable fabric ([see Fabric options](#fabric))
|
||||
|
||||
## Fabric Options {#fabric}
|
||||
|
||||
An apron works best with a fabric that is sturdy, tightly woven, and easy to clean.
|
||||
In addition, make sure to go for a natural fibre and in any case something that is
|
||||
heat-resistant.
|
||||
|
||||
Heavy cotton, chino, canvas or denim are all excellent choices.
|
||||
|
||||
When in doubt, go for raw denim (pure cotton, if it stretches it's no good).
|
||||
|
||||
## Cutting Instructions {#cutting}
|
||||
|
||||
- Cut **1 front** on the fold
|
||||
- Cut **1 pocket** on the fold
|
||||
- Cut **2 straps**
|
||||
|
|
@ -1,44 +0,0 @@
|
|||
---
|
||||
title: "Bee bikini top: Cutting Instructions"
|
||||
---
|
||||
|
||||
There are three variations of this pattern. **One Colour**, which is where the bikini top is made out of one colour. **Two Colours**, where the bikini top is made reversible by using two colours, and **Cross Back Tie Variant**, where the neck ties tie in the back replacing the band tie.
|
||||
|
||||
## Materials
|
||||
|
||||
### One Colour (Non-Reversible)
|
||||
|
||||
**Main fabric**
|
||||
|
||||
- Cut **4 cup** parts.
|
||||
- Cut **2 neck tie** parts.
|
||||
- Cut **1 band tie** part.
|
||||
|
||||
### Two Colours (Reversible)
|
||||
|
||||
**Main fabric**
|
||||
|
||||
- Cut **2 cup** parts from main.
|
||||
- Cut **2 neck tie** parts.
|
||||
- Cut **1 band tie** part.
|
||||
|
||||
**Lining fabric**
|
||||
|
||||
- Cut **2 cup** parts.
|
||||
- Cut **2 neck tie** parts.
|
||||
- Cut **1 band tie** part.
|
||||
|
||||
### Cross Back Tie Variant.
|
||||
|
||||
**Main fabric**
|
||||
|
||||
- Cut **4 cup** parts or Cut **2 cups** from main and lining if making reversible ties.
|
||||
- Cut **2 neck tie** parts or Cut **2 neck ties** from main and lining if making reversible ties.
|
||||
- Cut **1 band** part if making cross back tie variant instead of band tie variant.
|
||||
|
||||
:::note
|
||||
|
||||
|
||||
This pattern is easily made reversible by buying a similar fabric to the main fabric and using it as contrast. To save confusion on instructions it will be referred to as the lining fabric.
|
||||
|
||||
:::
|
||||
|
|
@ -1,14 +0,0 @@
|
|||
---
|
||||
title: "Bee bikini top: Fabric Options"
|
||||
---
|
||||
|
||||
### Main and Lining Fabric
|
||||
|
||||
The main and lining fabric are the same type of material. Bee is made with swimwear fabrics such as lycras.
|
||||
|
||||
:::note
|
||||
|
||||
|
||||
You only need lining fabric if you intend to make the pattern reversible or if you want the band for the cross back tie variant to be a contrasting fabric. Otherwise you can cut all the required pieces from your main fabric.
|
||||
|
||||
:::
|
||||
|
|
@ -1,138 +0,0 @@
|
|||
---
|
||||
title: "Bee bikini top: Sewing Instructions"
|
||||
---
|
||||
|
||||
:::warning
|
||||
|
||||
Make sure to use a stretch stitch
|
||||
:::
|
||||
|
||||
:::note
|
||||
|
||||
|
||||
When making a reversible top the second colour will be referred to as the lining fabric.
|
||||
The notches in this pattern act more like dots so **do not** clip them to mark them.
|
||||
|
||||
:::
|
||||
|
||||
### Step 1: Construct the Neck Ties
|
||||
|
||||
#### Neck Ties One Colour Method
|
||||
|
||||
- Fold one of the neck tie pieces in half lengthwise, right sides and raw edges together.
|
||||
- Sew along the raw edges, leaving one of the short ends open.
|
||||
- Trim the seam allowances and clip the corners.
|
||||
- Turn inside out and press.
|
||||
|
||||
:::note
|
||||
Repeat this for the other neck tie:::
|
||||
|
||||
#### Neck Ties Two Colours Method
|
||||
|
||||
- With right sides together, sew one main neck tie to one lining neck tie leaving one of the short edges open.
|
||||
- Trim the seam allowances and clip the corners.
|
||||
- Turn inside out. Press.
|
||||
|
||||
:::note
|
||||
Repeat this for the remaining neck tie pieces:::
|
||||
|
||||
### Step 2: The Cups
|
||||
|
||||
#### Band Tie Variant
|
||||
|
||||
- With raw edges and main fabric together, _baste_ one of the neck ties to the top of one of the cup pieces making sure that the tie goes towards the bottom of the cup.
|
||||
- With the neck tie sandwiched inside, pin a lining cup piece right sides together to the main cup piece.
|
||||
- Sew the lining to the main cup between notches along the front, top and side seams, making sure not to catch the neck tie and to reinforce the stitch at the notches.
|
||||
- (Optional) Fold to the wrong side and _edgestitch_ the seam allowance down between notches on the front and side seams. Do not sew the allowances together.
|
||||
- With good sides together, sew the lining to the main fabric along the bottom, leaving a gap between the side notches making sure to reinforce the stitch at the either end.
|
||||
- Trim the seam allowances of the sewn edges whilst leaving the seam allowance between the notches. Clip the corners. You may also need to clip the curved seams.
|
||||
- Turn inside out by pulling the neck tie through one of the gaps. Press.
|
||||
- (Optional) _edgestitch_ the top, sides and bottom of the cup leaving the gaps between the notches open.
|
||||
- Stitch along casing line to create band channel.
|
||||
|
||||
:::note
|
||||
Repeat this for the other cup:::
|
||||
|
||||
:::tip
|
||||
|
||||
|
||||
If your seam allowance is wide you may find that you need to trim the gaps' seam allowances a little to reduce bulk.
|
||||
If you are having trouble turning the cups you can try one of these methods:
|
||||
|
||||
- Create a 2.5cm (1") gap in the front or side seam and turn through that, either _slipstitch_-ing the gap closed or _edgestitch_-ing it closed during Step 7.
|
||||
- Widen one of the existing gaps and turn through that. Then when turned _edgestitch_ or _slipstitch_ the widened part closed.
|
||||
|
||||
:::
|
||||
:::note
|
||||
|
||||
|
||||
Whilst certainly optional it is recommended to _edgestitch_ the top and sides of the cups but the bottom is entirely optional.
|
||||
|
||||
:::
|
||||
|
||||
#### Cross Back Ties Variant
|
||||
|
||||
- With raw edges and main fabric together, _baste_ one of the neck ties to the top of one of the cup pieces making sure that the tie goes towards the bottom of the cup.
|
||||
- With the neck tie sandwiched inside, pin a lining cup piece right sides together to the main cup piece.
|
||||
- Sew the lining to the main cup along the front, top and side seams, making sure not to catch the neck tie.
|
||||
- Turn the cups right side out and press.
|
||||
- (Optional) _edgestitch_ the top and sides of the cups.
|
||||
- Sew a line of basting stitches along the bottom of the cups, just inside the seamline.
|
||||
- Gather cups along the basting stitches.
|
||||
|
||||
:::tip
|
||||
|
||||
|
||||
The amount you gather the cups is a matter of preference and cup size, but you can hold them up to yourself before stitching in place to ensure the fit is right.
|
||||
There are also notches on either side of the band piece's midpoint to help give you an idea of how much to gather by.
|
||||
|
||||
:::
|
||||
|
||||
- Find the midpoint of the band piece, this is marked by a notch, then pin the gathered bottoms of cups to band piece, right sides together. You'll want the cups to meet at the band's midpoint.
|
||||
- Stitch the cups to the band. Once they're stitched in place, check the fit of the cups once more before continuing. Unpicking swim fabric is a pain, so it's better to make sure the cups fit just right before moving on.
|
||||
|
||||
:::note
|
||||
|
||||
|
||||
You may prefer to wrap the one cup over the other at the midpoint. To do this place the sides of the cups at the outer notches and lay their fronts pass the midpoint with the left on top.
|
||||
|
||||
:::
|
||||
|
||||
- Now it's time to finish the band. To do this, fold in the seam allowance on both sides of the band. The raw edges of your swim cups should be turned to the inside of the band. Then, fold the band in half lengthwise, aligning the long edges and enclosing the seam allowances. Swim fabric can be slippery, so you may need extra pins or clips to hold the fabric in place.
|
||||
- Stitch along the top of the band, securing the seam allowances within the band.
|
||||
|
||||
:::tip
|
||||
|
||||
|
||||
For extra support, you can also add swim elastic into the band, either by stitching clear elastic into the band's seam allowance, or by threading swim elastic through the band at this point.
|
||||
|
||||
:::
|
||||
|
||||
- At this point, the band is a long tube with open ends. Next, we'll be sewing those closed while providing a loop to thread your neck ties through. To do this fold over one end of the band towards the inside of the swim top. The amount you fold over should be, at minimum, the width of your neck ties plus a seam allowance. Stitch the end down to create a loop at least as wide as your neck ties. There will be a lot of pressure on this point, so make sure your stitching is secure, and consider running a second line of stitching next to the first, for additional support. Repeat for the other end of the band.
|
||||
- To thread your neck-ties for cross back ties, take the tie from the left cup and thread it through the loop on the right side of the band, from top to bottom. Thread the tie from the right cup top-to-bottom through the loop on the left side of the band. Then tie the neck ties at center back to secure the swim top.
|
||||
- Skip to "Step 5: Enjoy!"
|
||||
|
||||
### Step 3: Band tie
|
||||
|
||||
You only need to do this step if making the band tie variant.
|
||||
|
||||
#### Band Tie One Colour Method
|
||||
|
||||
- Fold the band tie piece in half lengthwise, right sides and raw edges together.
|
||||
- Sew along the raw edges, leaving one of the short ends open.
|
||||
- Trim the seam allowances and clip the corners.
|
||||
- Turn inside out. Press.
|
||||
|
||||
#### Band Tie Two Colours Method
|
||||
|
||||
- With right sides together, sew the main band tie to the lining neck tie leaving one of the short edges open.
|
||||
- Trim the seam allowances and clip the corners.
|
||||
- Turn inside out. Press.
|
||||
|
||||
### Step 4: Putting it all together.
|
||||
|
||||
- Thread the band tie through the gaps along the bottom edge of the cups, making sure the front sides of the cups are in the centre and that the main and lining sides are on the respective side.
|
||||
|
||||
### Step 5: Enjoy!
|
||||
|
||||
Hooray, your Bee Bikini Top is finished!
|
||||
|
|
@ -1,5 +0,0 @@
|
|||
---
|
||||
title: "Bee bikini top: Required Measurements"
|
||||
---
|
||||
|
||||
<DesignMeasurements design='bee' />
|
||||
|
|
@ -1,19 +0,0 @@
|
|||
---
|
||||
title: "Bee bikini top: What You Need"
|
||||
---
|
||||
|
||||
To make Bee, you will need the following:
|
||||
|
||||
- Basic sewing supplies
|
||||
- About 0.5 - 1 metre (0.6 - 1.1 yards) of a suitable fabric ([see Bee Fabric options](/docs/designs/bee/fabric/))
|
||||
- (Optional) About 0.5 - 1 metre (0.6 - 1.1 yards) of lining fabric ([see Bee Fabric options](/docs/designs/bee/fabric/))
|
||||
- (Optional) Ribbons/Tapes/Cords for neck ties and bands, with the same length and width as neck tie and/or band.
|
||||
|
||||
:::note
|
||||
|
||||
|
||||
The lining fabric is only needed if you want to make this pattern reversible. If you don't, you only need the main fabric.
|
||||
You can use a serger/overlocker to construct this pattern but it is not mandatory.
|
||||
Ribbons/Tapes/Cords can be used instead of making custom ties. Just make sure to get more than you need and that you cut down to size after construction.
|
||||
|
||||
:::
|
||||
|
|
@ -1,15 +0,0 @@
|
|||
---
|
||||
title: "Bee bikini top: Designer Notes"
|
||||
---
|
||||
|
||||
I made Bee together with Prudencerabbit, as they wanted to make a swimwear pattern that went along with a previous freesewing pattern.
|
||||
It is based on a garment they made and wanted to make available for other people make as well.
|
||||
We worked of FreeSewing's body block Bella as a base, converting it to a single dart block to make the top.
|
||||
During pattern testing one of our contributors TangerineShark made a variant with crossover back ties which we found so cool we added it to Bee!
|
||||
You can get this variation by using [option Cross Back Ties](/docs/designs/bee/options/crossbackties/).
|
||||
Bee can also be made reversible by using options [Reversible](/docs/designs/bee/options/reversible), [Duo Colours Ties](/docs/designs/bee/options/duocolorties) & [Neck Tie Colours](/docs/designs/bee/options/necktiecolours).
|
||||
With the previous pattern being retired you can use [Uma](/docs/designs/uma) to make a matching bikini bottom.
|
||||
|
||||
_
|
||||
|
||||
bobgeorgethe3rd
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
---
|
||||
title: "Armhole depth (Bella)"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
Controls the armhole depth in the underlying Bella block Bee is based on
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
---
|
||||
title: "Back dart height (Bella)"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
Controls the back dart height in the underlying Bella block Bee is based on
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
---
|
||||
title: "Band Length (Cross back ties)"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
Controls the length of the band around your chest for the cross back ties variation of Bee
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
---
|
||||
title: "Band (chest) tie length"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
Controls the length of the tie around your chest
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
---
|
||||
title: "Band (chest) tie width"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
Controls the width of the tie/band around your chest
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,20 +0,0 @@
|
|||
---
|
||||
title: "Show Bella"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
Shows the outline of the Bella block Bee is based on
|
||||
|
||||
This is to help give context to the other options of Bee especially when using the fit options
|
||||
|
||||
:::note
|
||||
|
||||
|
||||
It is recommended to have this on when adjusting the options for this pattern but also to turn it off before printing
|
||||
|
||||
:::
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
---
|
||||
title: "Bottom depth"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
Controls how far the bikini cup extends downwards
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
---
|
||||
title: "Bust span ease"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
Controls the bust span ease in the underlying Bella block Bee is based on
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
---
|
||||
title: "Chest ease"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
Controls the chest ease in the underlying Bella block Bee is based on
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,27 +0,0 @@
|
|||
---
|
||||
title: "Cross back ties"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
A variation of Bee, where the neck ties cross and tie in the back by looping into a band that replaces the band tie
|
||||
|
||||
#### Default
|
||||
|
||||
- 2 neck ties
|
||||
- 1 band tie
|
||||
|
||||
The neck ties are sewn into the cups and tie at the neck like a halter.
|
||||
The band tie is thread through casings in the cups and ties with itself at the back
|
||||
|
||||
#### Cross Back Ties
|
||||
|
||||
- 2 neck ties
|
||||
- No band tie
|
||||
|
||||
The band tie and casing on the cups are replaced by a band which is sewn with loops in the back.
|
||||
The neck ties are longer and cross over each other in the back, then go through the loops in the band and then tie with one another.
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,9 +0,0 @@
|
|||
---
|
||||
title: Duo color ties
|
||||
---
|
||||
|
||||
This option allows you to generate a pattern where the ties use two colors rather than one.
|
||||
|
||||
Enable this option if you want ties using two colors.
|
||||
Leave it disabled (the default) if you want ties using a single color.
|
||||
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
---
|
||||
title: "Front armhole pitch depth (Bella)"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
Controls the front armhole pitch depth in the underlying Bella block Bee is based on
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
---
|
||||
title: "Front curve"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
Controls the curvature of the front of the bikini cup
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
---
|
||||
title: "Front shoulder width (Bella)"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
Controls the front shoulder width in the underlying Bella block Bee is based on
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
---
|
||||
title: "Full chest reduction (Bella)"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
Controls the full chest reduction in the underlying Bella block Bee is based on
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
---
|
||||
title: "High bust width (Bella)"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
Controls the high bust width in the underlying Bella block Bee is based on
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
---
|
||||
title: "Neck tie colours"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
Whether you want single color ties around your neck, or dual-coloured ones
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
---
|
||||
title: "Neck tie length"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
Controls the length of the ties around your neck
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
---
|
||||
title: "Neck tie width"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
Controls the width of the ties around your neck
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,8 +0,0 @@
|
|||
---
|
||||
title: Pointed tie ends
|
||||
---
|
||||
|
||||
This option allows you to generate a pattern where the ties have a pointy end, rather than a straight one.
|
||||
|
||||
Enable this option if you want your ties to have pointy ends.
|
||||
Disable this option (the default) if you want your ties to have straight ends.
|
||||
|
|
@ -1,5 +0,0 @@
|
|||
---
|
||||
title: "Bee bikini top: Design Options"
|
||||
---
|
||||
|
||||
<DesignOptions design='bee' />
|
||||
|
|
@ -1,6 +0,0 @@
|
|||
---
|
||||
title: Reversible
|
||||
---
|
||||
|
||||
Whether you want to make a fully reversible Bee or not.
|
||||
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
---
|
||||
title: "Shoulder to Shoulder ease (Bella)"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
Controls the shoulder to shoulder ease in the underlying Bella block Bee is based on.
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
---
|
||||
title: "Side curve"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
Controls the curvature of the side of the bikini cup
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
---
|
||||
title: "Side depth"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
Controls how far the bikini cup extends towards the side
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
---
|
||||
title: "Ties"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
Whether to includes ties, yes or no
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
---
|
||||
title: "Top Depth"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
Controls how far the bikini cup extends upwards
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
---
|
||||
title: "Waist ease"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
Controls the waist ease in the underlying Bella block Bee is based on
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,8 +0,0 @@
|
|||
---
|
||||
title: "Bee bikini top"
|
||||
---
|
||||
|
||||
|
||||
|
||||
<DesignInfo design='bee' docs />
|
||||
|
||||
|
|
@ -1,29 +0,0 @@
|
|||
---
|
||||
title: "Bella body block: Cutting Instructions"
|
||||
---
|
||||
|
||||
**Main fabric**
|
||||
|
||||
- Cut **1 Front** part on the fold.
|
||||
- Cut **2 Back** parts.
|
||||
|
||||
These cutting instructions are just for the default Bella block. Adjust your cutting accordingly if you have/are making changes to the block.
|
||||
|
||||
:::tip
|
||||
|
||||
|
||||
If you do not have someone to help pin you into Bella then you may find it easier to Cut 2 Front parts with seam allowance and sew the backs up when constructing so you can pin in the front.
|
||||
|
||||
:::
|
||||
|
||||
:::note
|
||||
|
||||
|
||||
###### Bella is a block, not a pattern
|
||||
|
||||
A block is a basic shape on which other patterns are based.
|
||||
They are sometimes also called slopers, although purists will argue that a block and a sloper are different things.
|
||||
|
||||
Blocks are typically not made as-is but rather serve as a basis for other patterns.
|
||||
|
||||
:::
|
||||
|
|
@ -1,19 +0,0 @@
|
|||
---
|
||||
title: "Bella body block: Fabric Options"
|
||||
---
|
||||
|
||||
If you are making a default Bella to see how it fits we recommend a fabric such as **Calico (Muslin)** or a cheaper fabric that matches the drape and stretch of the fabric you intend to make a finalised version of Bella with.
|
||||
|
||||
You can use scraps of fabrics from your stash so don't worry about buying fabric specifically for Bella.
|
||||
|
||||
:::note
|
||||
|
||||
|
||||
###### Bella is a block, not a pattern
|
||||
|
||||
A block is a basic shape on which other patterns are based.
|
||||
They are sometimes also called slopers, although purists will argue that a block and a sloper are different things.
|
||||
|
||||
Blocks are typically not made as-is but rather serve as a basis for other patterns.
|
||||
|
||||
:::
|
||||
|
|
@ -1,82 +0,0 @@
|
|||
---
|
||||
title: "Bella body block: Sewing Instructions"
|
||||
---
|
||||
|
||||
:::note
|
||||
|
||||
|
||||
###### Bella is a block, not a pattern
|
||||
|
||||
A block is a basic shape on which other patterns are based.
|
||||
They are sometimes also called slopers, although purists will argue that a block and a sloper are different things.
|
||||
|
||||
Blocks are typically not made as-is but rather serve as a basis for other patterns so the instructions below will not go in depth about closures or finishes and are for the default Bella block.
|
||||
|
||||
:::
|
||||
|
||||
### Step 1: Mock-up Construction
|
||||
|
||||
- Close the front bust and waist darts.
|
||||
- Close the back darts.
|
||||
- With _good sides together_ sew the backs to the front at the shoulder seams, _easing_ the backs to fit the front.
|
||||
- With _good sides together_ sew the backs to the front at the side seams.
|
||||
|
||||
:::tip
|
||||
|
||||
|
||||
If you are making adjustments you may wish to sew the seams _wrong sides together_ to make them easier to adjust.
|
||||
|
||||
:::
|
||||
|
||||
:::note
|
||||
|
||||
|
||||
Bella has a back dart only when it is needed, based on the measurements
|
||||
and design options.
|
||||
If the back dart is not needed then it will be omitted from the pattern.
|
||||
|
||||
:::
|
||||
|
||||
### Step 2: Try it on
|
||||
|
||||
- Try it on and check the fit by pinning the back closed whilst wearing it.
|
||||
- Make any alterations and try it on again.
|
||||
- Repeat until you are happy.
|
||||
|
||||
:::tip
|
||||
|
||||
|
||||
If you do not have someone to help with pinning, you may find it easier to cut the front part in two with seam allowance rather than on a fold and sew the back seam up so that you can pin in the front when trying on.
|
||||
|
||||
Keep an eye out for anything you keep doing whilst wearing the mock-up, are you pulling it down? Constantly adjusting the shoulder? etc. Things like these are signs of where the pattern may need adjusting.
|
||||
|
||||
Sometimes you may need to wear the mock-up for an extended amount of time to get a better sense of the fit so don't be afraid to walk around in it for a couple of hours.
|
||||
|
||||
:::
|
||||
|
||||
:::note
|
||||
|
||||
|
||||
Remember to treat Bella as a basis rather than a final product, so adjust what you need to get the desired look.
|
||||
For instance:
|
||||
|
||||
- Change the neck line
|
||||
- Add/change the closure allowances
|
||||
- Alter the dart placements
|
||||
- Add a collar
|
||||
|
||||
It is all up to you! Experiment and go forth!
|
||||
|
||||
:::
|
||||
|
||||
### Step 3: Make a paper pattern
|
||||
|
||||
- Once happy with all your changes unpick your mockup and make a paper pattern based off of it.
|
||||
- Now you have a pattern you can use to produce a garment.
|
||||
|
||||
:::note
|
||||
|
||||
|
||||
It is best practice to make a paper pattern from the mock-up if you have made any alterations, as this will allow you to clean up any lines but also means you have a pattern that you can keep producing garments from.
|
||||
|
||||
:::
|
||||
|
|
@ -1,5 +0,0 @@
|
|||
---
|
||||
title: "Bella body block: Required Measurements"
|
||||
---
|
||||
|
||||
<DesignMeasurements design='bella' />
|
||||
|
|
@ -1,22 +0,0 @@
|
|||
---
|
||||
title: "Bella body block: What You Need"
|
||||
---
|
||||
|
||||
To make Bella, you will need the following:
|
||||
|
||||
- Basic sewing supplies
|
||||
- About 0.5 metres (0.6 yards) of a suitable fabric ([see Bella Fabric options](/docs/designs/bella/fabric/))
|
||||
|
||||
This list is for a default Bella Block. If you have/are making changes to the block you may need to get additional items such as closures, binding etc.
|
||||
|
||||
:::note
|
||||
|
||||
|
||||
###### Bella is a block, not a pattern
|
||||
|
||||
A block is a basic shape on which other patterns are based.
|
||||
They are sometimes also called slopers, although purists will argue that a block and a sloper are different things.
|
||||
|
||||
Blocks are typically not made as-is but rather serve as a basis for other patterns.
|
||||
|
||||
:::
|
||||
|
|
@ -1,15 +0,0 @@
|
|||
---
|
||||
title: "Bella body block: Designer Notes"
|
||||
---
|
||||
|
||||
This block was a collaboration between myself and an industry insider who prefers to remain anonymous because of her profession.
|
||||
|
||||
It is the parametric version of a base block for womenswear that is used in the industry in Italy to design womenswear.
|
||||
However, while the block will adapt to your measurements, the original block that it is based on is in really not suitable for a very wide sizing range.
|
||||
|
||||
So your mileage may very here, especially when you are further from the kind of skinny ladies Italians tend to design for.
|
||||
|
||||
See also [this FAQ on womenswear blocks for more background info](/docs/about/faq/womenswear-blocks).
|
||||
|
||||
joost
|
||||
|
||||
|
|
@ -1,13 +0,0 @@
|
|||
---
|
||||
title: "Armhole depth"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
|
||||
|
||||
The **armhole depth** option controls the depth of the armhole.
|
||||
|
||||
|
||||
|
||||
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 162 KiB |
|
|
@ -1,13 +0,0 @@
|
|||
---
|
||||
title: "Back armhole curvature"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
|
||||
|
||||
The **back armhole curvature** option controls how much the armhole is scooped at out the bottom in the back.
|
||||
|
||||
|
||||
|
||||
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 162 KiB |
|
|
@ -1,13 +0,0 @@
|
|||
---
|
||||
title: "Back armhole pitch depth"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
|
||||
|
||||
The **back armhole pitch depth** option controls the vertical position of the armhole pitch point at the back.
|
||||
|
||||
|
||||
|
||||
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 161 KiB |
|
|
@ -1,13 +0,0 @@
|
|||
---
|
||||
title: "Back armhole slant"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
|
||||
|
||||
The **back armhole slant** slightly rotates the armhole around the back pitch point.
|
||||
|
||||
|
||||
|
||||
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 152 KiB |
|
|
@ -1,13 +0,0 @@
|
|||
---
|
||||
title: "Back dart height"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
|
||||
|
||||
The **back dart height** option controls the height (length if you will) of the back dart.
|
||||
|
||||
|
||||
|
||||
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 299 KiB |
|
|
@ -1,13 +0,0 @@
|
|||
---
|
||||
title: "Back hem slope"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
|
||||
|
||||
The **back hem slope** option controls the slope of the hem at the back.
|
||||
|
||||
|
||||
|
||||
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 202 KiB |
|
|
@ -1,13 +0,0 @@
|
|||
---
|
||||
title: "Back neck cutout"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
|
||||
|
||||
The **back neck cutout** option controls how far the neck opening is scooped out at the back.
|
||||
|
||||
|
||||
|
||||
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 165 KiB |
|
|
@ -1,13 +0,0 @@
|
|||
---
|
||||
title: "Bust dart angle"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
<!--  -->
|
||||
|
||||
The **bust dart angle** option controls the angle of the bust dart.
|
||||
It attempts to set the angle of the top leg of the dart at the
|
||||
requested angle.
|
||||
However, the angle may be limited to ensure that a minimum
|
||||
amount of fabric is left above and below the dart.
|
||||
|
|
@ -1,14 +0,0 @@
|
|||
---
|
||||
title: "Bust dart curve"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
|
||||
|
||||
The **bust dart curve** option controls the curvature of the bust dart.
|
||||
From slightly curved convex, to straight, to slightly curved concave.
|
||||
|
||||
|
||||
|
||||
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 155 KiB |
|
|
@ -1,14 +0,0 @@
|
|||
---
|
||||
title: "Bust dart length"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
|
||||
|
||||
The **bust dart length** option controls the length of the bust dart.
|
||||
The maximum length brings the dart all the way to the bust apex.
|
||||
|
||||
|
||||
|
||||
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 165 KiB |
|
|
@ -1,10 +0,0 @@
|
|||
---
|
||||
title: "Bust dart minimum fabric"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
<!--  -->
|
||||
|
||||
The **bust dart minimum fabric** option controls the minimum amount
|
||||
of fabric to leave above and below the bust dart.
|
||||
|
|
@ -1,16 +0,0 @@
|
|||
---
|
||||
title: "Bust span ease"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
|
||||
|
||||
The **bust span ease** option controls how much ease is applied to the bust span.
|
||||
|
||||
:::note
|
||||
This will not add ease to the garment, but merely influence the bust point:::
|
||||
|
||||
|
||||
|
||||
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 321 KiB |
File diff suppressed because one or more lines are too long
|
Before Width: | Height: | Size: 22 KiB |
|
|
@ -1,13 +0,0 @@
|
|||
---
|
||||
title: "Chest ease"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
|
||||
|
||||
The **chest ease** option controls the amount of ease at the fullest part of your chest.
|
||||
|
||||
|
||||
|
||||
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 570 KiB |
|
|
@ -1,11 +0,0 @@
|
|||
---
|
||||
title: "Front armhole curvature"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
Controls how deep the armhole is scooped out at the front bottom
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -1,13 +0,0 @@
|
|||
---
|
||||
title: "Front armhole pitch depth"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
|
||||
|
||||
The **front armhole pitch depth** option controls the vertical position of the armhole pitch point at the front.
|
||||
|
||||
|
||||
|
||||
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 200 KiB |
|
|
@ -1,13 +0,0 @@
|
|||
---
|
||||
title: "Front shoulder width"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
|
||||
|
||||
The **front shoulder width** option controls the width of the shoulders at the front, relative to the back.
|
||||
|
||||
|
||||
|
||||
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 209 KiB |
|
|
@ -1,11 +0,0 @@
|
|||
---
|
||||
title: "Full chest ease reduction"
|
||||
---
|
||||
|
||||
***
|
||||
|
||||
Allows you to independently reduce the ease around the chest to make it fit tight(er) in that area
|
||||
|
||||
|
||||
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show more
Loading…
Add table
Add a link
Reference in a new issue