chore: Ported more design docs (#7223)
This ports lucy, jane, and holmes
This commit is contained in:
Joost De Cock
GitHub
parent
a2ad47f4ba
commit
9511126b6f
31 changed files with 1488 additions and 1 deletions
298
sites/orgdocs/docs/designs/holmes/instructions/readme.mdx
Normal file
298
sites/orgdocs/docs/designs/holmes/instructions/readme.mdx
Normal file
|
|
@ -0,0 +1,298 @@
|
|||
---
|
||||
title: 'Holmes deerstalker hat: Sewing Instructions'
|
||||
sidebar_label: Sewing Instructions
|
||||
sidebar_position: 20
|
||||
---
|
||||
|
||||
## Step 1: Prepping the Pieces
|
||||
|
||||
- If needed, Interface the crown and half the ear flap pieces.
|
||||
- If not already done so, it is recommended to mark the seam lines on your
|
||||
fabric pieces by either a temporary marker or by thread marking. This is for
|
||||
a more precise sew which is key for hat construction.
|
||||
|
||||
:::tip Tips
|
||||
|
||||
- Thread marking allows for the seam line to be seen on both the right and wrong
|
||||
sides.
|
||||
- Even if you face the crown you may not want to face the ear flaps if you want
|
||||
them to be less rigid when tieing down.
|
||||
:::
|
||||
|
||||
:::warning
|
||||
These instructions assume you have marked your seam lines. They may be harder
|
||||
to follower if you skip this step.
|
||||
:::
|
||||
|
||||
## Step 2: The Crown
|
||||
|
||||
- With right sides together, matching seam lines and peaks, sew two crown
|
||||
pieces together.
|
||||
- Press seams open. You made need to use a tailors ham for this, if you do not
|
||||
have one you can use flannels or towels instead.
|
||||
- (Optional) _Edgestitch_ both sides of the seam, making sure to catch the seam
|
||||
allowances.
|
||||
- Repeat until you have two halves. If half the number of crown pieces is an
|
||||
odd number you will have to sew a single piece to each half. e.g. If you
|
||||
have 6 crown pieces, you make two halves of 3 sewing one piece to two sewn
|
||||
together pieces.
|
||||
- With right sides together, matching seam lines and peaks, sew the two halves
|
||||
together. You may find it easier to handstitch the peak together due to bulk
|
||||
or for precision. This seam will be referred to as the "centre crown seam"
|
||||
going forward.
|
||||
- (Optional) _Edgestitch_ both sides of the centre crown seam, making sure to
|
||||
catch the seam allowances.
|
||||
|
||||
:::tip
|
||||
Depending on your seam allowance you may want to trim seams as you go to reduce
|
||||
bulk.
|
||||
:::
|
||||
|
||||
## Step 3: The Ear Flaps
|
||||
|
||||
### Ear Flaps with Ties
|
||||
|
||||
- Cut two 12" (30cm) - 16" (40cm) length of ribbon. These will be referred to
|
||||
as ties going forward.
|
||||
- _Baste_ a tie to the right side of an ear flap (the interfaced one if using).
|
||||
Repeat for other tie.
|
||||
- With right sides together, matching seam lines, sew a tie ear flap to a
|
||||
non-tie ear flap.
|
||||
- Clip and trim seam allowance.
|
||||
- Turn inside out and press.
|
||||
- (Optional) _Topstitch_ or _edgestitch_ the folded edge.
|
||||
- _Baste_ the raw edges together.
|
||||
- Repeat for the remaining ear flap.
|
||||
|
||||
:::tip
|
||||
If you are uncertain about the length you want for your ties take 1 metre (39")
|
||||
of ribbon and cut it in half. Use these halves as the ties in the instructions
|
||||
above. The ties are finished at the end so you can adjust the lengths then.
|
||||
:::
|
||||
|
||||
The lengths above are recommendations so feel free to go as long or as short as
|
||||
you like with the ties. If you prefer you can make your custom ties with
|
||||
fabric, [see Holmes cutting](/docs/designs/holmes/cutting/) for more info.
|
||||
|
||||
#### Ear Flaps with Buttonholes
|
||||
|
||||
- Face the backs of two of the buttonholes. (This is not needed if two flaps
|
||||
have already been interfaced)
|
||||
- With right sides together, matching seam lines, sew two ear flap pieces
|
||||
together (one interfaced, one not).
|
||||
- Clip and trim seam allowance.
|
||||
- Turn inside out and press.
|
||||
- (Optional) _Topstitch_ or _Edgestitch_ the folded edge.
|
||||
- _Baste_ the raw edges together.
|
||||
- Sew the buttonhole in your preferred method.
|
||||
- Repeat for the remaining ear flap.
|
||||
|
||||
:::warning
|
||||
The ear flaps will need to be long enough to go over the top of the peak so
|
||||
they can be done up by a button on the peak. Do not use this method if you are
|
||||
not using a button on the top.
|
||||
:::
|
||||
|
||||
:::tip
|
||||
For both Ear Flaps with Ties and Button Holea, it is recommended to at least
|
||||
_topstitch_ the ear flaps but this may not be desirable with certain patterns
|
||||
so has been marked as optional.
|
||||
:::
|
||||
|
||||
## Step 4: The Visors
|
||||
|
||||
There are two methods for constructing the visors. This is due to the different
|
||||
types of materials the visor inserts can be made of. Method 1 is for materials
|
||||
that will not be damaged by a needle or iron. Method 2 is for materials that
|
||||
will be damaged by a needle or iron. Read both methods to determine which is
|
||||
best for you to use.
|
||||
|
||||
### The Visors Method 1
|
||||
|
||||
- Place visor insert on one visor piece inside seam lines.
|
||||
- Temporarily secure visor insert to visor with temporary _pad Stitches_. This
|
||||
will be referred to as "faced visor" going forward.
|
||||
- _Baste_ along the seam line of the inner curve of the faced visor, making
|
||||
sure not to catch the visor insert.
|
||||
- With right sides together, matching seam lines and centre fronts, sew the
|
||||
faced visor to another visor piece along the outer curve close to the visor
|
||||
insert, making sure not to catch the visor Insert.
|
||||
- Notch and trim the outer curve making sure not to clip the stitching. (You
|
||||
may wish to turn and check the shape before this step)
|
||||
- Turn inside out and press. Making sure that the seam allowances are on top of
|
||||
not under the visor insert.
|
||||
- Using the previous basting line as a guide, _baste_ the opening closed.
|
||||
- Repeat this for remaining visor pieces.
|
||||
|
||||
:::warning
|
||||
Be careful with the heat of an iron when using certain insert materials. You do
|
||||
not want to melt the Visor Insert and damage both it and the fabric.
|
||||
:::
|
||||
|
||||
:::note
|
||||
If preferred you can temporarily attach the visor insert another way that does
|
||||
not require hand sewing and putting a needle through the material. Just make
|
||||
sure it does not damage your hat fabric when removing or applying.
|
||||
:::
|
||||
|
||||
### The Visors Method 2
|
||||
|
||||
- With rights sides together, matching seam lines and centre fronts, sew the
|
||||
outer curve of two visor pieces together.
|
||||
- Notch and trim (if needed) the outer curve making sure not to clip the
|
||||
stitching. (You may wish to turn and check the shape before this step)
|
||||
- Turn inside out and press.
|
||||
- Insert visor insert in to sewn visor tightly so there is no gap on the outer
|
||||
curve and the seam allowances are all one on side of the visor insert. This
|
||||
will be the upper side of the visor.
|
||||
- Pin the inner curve together making sure that the outer edge is pulled
|
||||
tightly over the visor insert.
|
||||
- _Baste_ as close as you can to the inner curve of the visor insert, making
|
||||
sure you pull the fabric tightly over the outer edge as you sew.
|
||||
- Repeat for the remaining visor pieces.
|
||||
|
||||
## Step 5: Assembly and Lining
|
||||
|
||||
Once again there are two methods for final assembly and lining. Read both
|
||||
methods carefully to determine which is best for you.
|
||||
|
||||
### Assembly and Lining Method 1
|
||||
|
||||
- Matchings centres and seam lines align the ear flap with the right side of
|
||||
one of the panels that is not part of the centre crown seam. Making sure the
|
||||
faced side is placed against the crown (if faced).
|
||||
- Sew ear flap to the crown along seam lines.
|
||||
- Repeat for the remaining ear flap on the opposite side of the crown.
|
||||
- Align centre front of visor with the right side of the centre crown seam
|
||||
making sure the visor insert is on the bottom.
|
||||
- Hand-baste the visor to the crown matching the visor basting lines to the
|
||||
crown seam lines. It easier to _baste_ the centre down first and then work
|
||||
from the centre out.
|
||||
- Sew the visor to the crown along seam lines. You may find it easier to
|
||||
permanently hand-sew the visor on rather than using a machine.
|
||||
- Repeat for the remaining visor on the opposite side of the centre crown seam.
|
||||
- Remove all pad and basting stitches.
|
||||
- Press the seam allowances inwards, making sure the stitching is not visible
|
||||
on the outside.
|
||||
- (Optional) Loosely _whipstitch_ the seams to the inside of the crown making
|
||||
sure the stitching does not show on the outside.
|
||||
- Construct lining the same way as the crown omitting _edgestitching_.
|
||||
- Fold and Press under the bottom seam allowance of the lining. You may find
|
||||
you need to press under more to prevent the lining from showing. You may also
|
||||
find you need to _baste_ the seam allowance down.
|
||||
- Matching centre crown seams and panel seams, pin the lining into the hat
|
||||
wrong sides together. Placing the folded edge along the stitching lines.
|
||||
- _Slipstitch_ or _whipstitch_ the lining to the seam allowance of the hat.
|
||||
- Remove lining basting if used.
|
||||
- (Optional) _Tack_ the peak of the lining to the peak of the crown. This is to
|
||||
help prevent the lining from falling out.
|
||||
|
||||
### Assembly and Lining Method 2
|
||||
|
||||
- Matchings centres and seam lines align the ear flap with the right side of
|
||||
one of the panels that is not part of the centre crown seam. Making sure the
|
||||
faced side is placed against the crown (if faced).
|
||||
- _Baste_ the ear flap to the crown along seam lines
|
||||
- Repeat for the remaining ear flap on the opposite side of the crown.
|
||||
- Align centre front of visor with the right side of the centre crown seam
|
||||
making sure the visor insert is on the bottom.
|
||||
- Hand-baste the visor to the crown matching the visor basting lines to the
|
||||
crown seam lines. It easier to _baste_ the centre down first and then work
|
||||
from the centre out.
|
||||
- (Optional) Machine-baste the visor to the crown along seam lines.
|
||||
- Repeat for the remaining visor on the opposite side of the centre crown seam.
|
||||
- Construct lining the same way as the crown omitting _edgestitching_ and
|
||||
leaving a gap in the centre lining seam large enough to turn the hat.
|
||||
- With right sides together, matching centre crown seams, panel seams and seam
|
||||
lines. Sew the lining to the crown along seam lines. If bulky you may want to
|
||||
trim either the lining seams or both seams.
|
||||
- Turn hat inside out, pressing lining to inside.
|
||||
- (Optional/Alternate) _Understitch_ lining.
|
||||
- Slipstitch lining opening closed.
|
||||
- (Optional/Alternate) _Topstitch_ or _Edgestitch_ along the outside of the
|
||||
hat, catching the lining on the inside making sure it is not peaking whilst
|
||||
you sew.
|
||||
- (Optional) _Tack_ the peak of the lining to the peak of the crown. This is to
|
||||
help prevent the lining from falling out.
|
||||
|
||||
:::tip Attention
|
||||
|
||||
For both Assembly and Lining Methods, you can attach the visors on first, just
|
||||
make sure the visors are under the ear flaps if there is any overlap. It is
|
||||
simply whether you prefer the visors to be underneath or prefer the ear flaps
|
||||
to be underneath like in the instructions.
|
||||
|
||||
For both Assembly and Lining Methods, if you are having trouble dealing with
|
||||
the curves of the visors, sew a stitching line an 1/8" (3mm) from the basting
|
||||
line in the seam allowance of the visor and clip to it. This should make it
|
||||
easier to bend the visor to shape. Just make sure to hide this stitching and
|
||||
the clips when attaching the lining.
|
||||
|
||||
For both Assembly and Lining Methods, Assembly and Lining instructions are
|
||||
written with a 6 panelled Holmes in mind. You may find the placement of visors
|
||||
and ear flap pieces are different for other numbered panelled Holmes. As a rule
|
||||
of thumb generally the centre front of the visor is always on the centre crown
|
||||
seam so go from there if struggling.
|
||||
:::
|
||||
|
||||
## Step 6: Finishing Ties
|
||||
|
||||
If you did not cut your ties down when constructing the ear flaps, now is the
|
||||
time to do so. If you made custom ties with fabric then you do not need to do
|
||||
these steps. Again read through both methods carefully and pick which is the
|
||||
best for you.
|
||||
|
||||
### Finishing Ties Method 1
|
||||
|
||||
- Fold the ends of a tie in half and cut a triangle out from the corner to the
|
||||
fold.
|
||||
- Unfold.
|
||||
- If you are worried about the ties fraying you can use fray check or
|
||||
equivalent.
|
||||
- Repeat for the remaining tie.
|
||||
|
||||
### Finishing Ties Method 2
|
||||
|
||||
- Fold under 1/8" (3mm) and another 1/8" (3mm) on one of the ties. Pin if
|
||||
needed.
|
||||
- _Whipstitch_ the folded edge down to the tie
|
||||
- Repeat for the remaining tie.
|
||||
|
||||
:::tip
|
||||
To determine which way you want to fold the ties, you may find it easier to tie
|
||||
the ear flaps up first. Generally you want the fold to be on the underside of
|
||||
the ties but as always it is personal preference.
|
||||
:::
|
||||
|
||||
## Step 7: Button
|
||||
|
||||
Unless you are doing the Buttonhole Ear Flaps you do not have to sew a button
|
||||
on but it may be useful if you want to hide any misaligned seams at the crown
|
||||
peak.
|
||||
|
||||
- Construct a covered button.
|
||||
- Attach the button via the shank to the peak of the crown doing your best to
|
||||
keep it in the middle of the seams.
|
||||
- Alternatively if you are not using the button with the ear flaps you can bend
|
||||
the shank down and _whipstitch_ the edge of the button to the crown instead
|
||||
so it does not move.
|
||||
|
||||
Whilst certainly optional, you may find that a button is what is missing from
|
||||
the hat to finish the look. So if you are uncertain of the look at this point,
|
||||
make up a quick button and place it on temporarily to see if this is what is
|
||||
missing. If it is, attach it permanently. Whilst a covered button is
|
||||
recommended you can use whatever button you desire, feel free to experiment!
|
||||
|
||||
## Step 8: Enjoy your new hat!
|
||||
|
||||
That's it! You're all done. Now enjoy the world in your wonderful new hat
|
||||
whilst maybe solving a crime or two!
|
||||
|
||||
:::tip
|
||||
Remember these instructions are just guidelines so don't worry if you want to
|
||||
construct the hat differently. The Diagrams are yet to be made for this
|
||||
pattern so in the mean time if you need a visual aid, watch the YouTube video
|
||||
that inspired this pattern:
|
||||
:::
|
||||
|
||||
<YouTube id="H24VBFMZJF4" />
|
||||
|
|
@ -0,0 +1,6 @@
|
|||
---
|
||||
title: 'Buttonhole guide'
|
||||
---
|
||||
|
||||
Adds a buttonhole to the ear flap to help you draft the buttonhole ear flap
|
||||
variant
|
||||
|
|
@ -0,0 +1,5 @@
|
|||
---
|
||||
title: 'Ear flap length'
|
||||
---
|
||||
|
||||
Controls the length of the ear flaps independently from the crown pieces
|
||||
|
|
@ -0,0 +1,5 @@
|
|||
---
|
||||
title: 'Ear flap width'
|
||||
---
|
||||
|
||||
Controls the width of the ear flaps
|
||||
142
sites/orgdocs/docs/designs/holmes/options/gores/gores.svg
Normal file
142
sites/orgdocs/docs/designs/holmes/options/gores/gores.svg
Normal file
|
|
@ -0,0 +1,142 @@
|
|||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<svg
|
||||
xmlns:dc="http://purl.org/dc/elements/1.1/"
|
||||
xmlns:cc="http://creativecommons.org/ns#"
|
||||
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
|
||||
xmlns:svg="http://www.w3.org/2000/svg"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
|
||||
xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
|
||||
version="1.1"
|
||||
width="1050.3943"
|
||||
height="360.95767"
|
||||
id="svg13134"
|
||||
sodipodi:docname="linedrawing.svg"
|
||||
inkscape:version="0.92.4 (5da689c313, 2019-01-14)">
|
||||
<sodipodi:namedview
|
||||
pagecolor="#ffffff"
|
||||
bordercolor="#666666"
|
||||
borderopacity="1"
|
||||
objecttolerance="10"
|
||||
gridtolerance="10"
|
||||
guidetolerance="10"
|
||||
inkscape:pageopacity="0"
|
||||
inkscape:pageshadow="2"
|
||||
inkscape:window-width="1920"
|
||||
inkscape:window-height="1015"
|
||||
id="namedview14"
|
||||
showgrid="false"
|
||||
fit-margin-top="0"
|
||||
fit-margin-left="0"
|
||||
fit-margin-right="0"
|
||||
fit-margin-bottom="0"
|
||||
inkscape:zoom="1.3374514"
|
||||
inkscape:cx="492.01785"
|
||||
inkscape:cy="165.45687"
|
||||
inkscape:window-x="0"
|
||||
inkscape:window-y="0"
|
||||
inkscape:window-maximized="1"
|
||||
inkscape:current-layer="svg13134" />
|
||||
<metadata
|
||||
id="metadata3096">
|
||||
<rdf:RDF>
|
||||
<cc:Work
|
||||
rdf:about="">
|
||||
<dc:format>image/svg+xml</dc:format>
|
||||
<dc:type
|
||||
rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
|
||||
<dc:title />
|
||||
</cc:Work>
|
||||
</rdf:RDF>
|
||||
</metadata>
|
||||
<defs
|
||||
id="defs13136" />
|
||||
<path
|
||||
style="fill:#212121;fill-opacity:0.98086123;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-6-3"
|
||||
d="M 216.27841,17.442486 C 285.76235,14.133576 144.28526,211.62738 71.792027,195.48226 52.813787,191.25558 70.905657,92.465876 114.52017,54.260666 c 45.59634,-39.94121 81.24825,-35.84146 101.75824,-36.81818 z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="ssss" />
|
||||
<path
|
||||
style="fill:#212121;fill-opacity:0.98086123;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674"
|
||||
d="M 65.247037,238.47696 C 57.814397,92.580296 146.92406,19.159706 227.94827,17.133726 416.98378,12.406986 428.6865,235.81977 428.6865,235.81977 c 6.21243,1.59293 98.63729,77.15338 -19.77735,39.65891 -16.93044,-5.36081 -32.00111,11.3221 -82.39397,8.45492 -11.69981,23.16096 -48.95213,60.48948 -83.49208,68.46717 C 162.65073,370.96435 42.841827,346.20127 6.2096769,326.10272 -13.920643,315.05804 43.569907,271.40607 65.247037,238.47696 Z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cscscssc" />
|
||||
<g
|
||||
transform="matrix(0.991716,0,0,0.991716,199.88965,512.89649)"
|
||||
style="fill:#212121;stroke:#545454"
|
||||
id="g4303" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-67"
|
||||
d="M 127.59385,256.46932 C 123.04328,197.03483 166.53834,85.916856 240.62943,21.168636"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-5"
|
||||
d="M 326.51518,283.9336 C 168.84303,267.20551 122.98154,258.48599 65.247037,238.47696"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:#212121;fill-opacity:0.98086123;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-6"
|
||||
d="m 259.93272,22.594036 c 3.79974,-11.58118 71.55244,-0.42441 105.32678,31.90705 55.21804,52.859064 78.36975,184.859614 61.84481,203.456854 -11.45276,12.88898 -21.57439,23.81728 -38.81422,28.53139 -22.34126,6.10906 -33.82853,4.667 -57.7438,2.00614 C 308.3819,286.02942 314.59538,201.54828 266.8497,105.51764 259.26007,90.252656 254.74976,38.391156 259.93272,22.594036 Z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="sssssss" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:10;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-67-5"
|
||||
d="m 245.27799,20.184136 c -16.18864,33.02752 -54.92821,38.49401 -61.68452,32.04878 -7.56831,-7.21981 38.17865,-57.1909599 60.55119,-31.48217 2.08865,2.40013 70.63727,20.24099 51.82058,-7.65192 -12.58672,-18.6579199 -47.69001,0.97044 -50.68725,7.08531 z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="sssss" />
|
||||
<path
|
||||
style="fill:#212121;fill-opacity:0.98086123;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-6-3-0"
|
||||
d="m 795.79416,17.208006 c 69.48397,-3.30891 -71.99318,194.184894 -144.48638,178.039774 -18.9783,-4.22668 -0.8864,-103.016384 42.7281,-141.221594 45.5964,-39.94121 81.2483,-35.84146 101.75828,-36.81818 z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="ssss" />
|
||||
<path
|
||||
style="fill:#212121;fill-opacity:0.98086123;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-9"
|
||||
d="m 644.76278,238.24248 c -7.4326,-145.896664 81.677,-219.317254 162.70124,-221.343234 189.03551,-4.72674 200.73818,218.686044 200.73818,218.686044 6.2124,1.59293 98.6373,77.15338 -19.77727,39.65891 -16.9305,-5.36081 -32.0011,11.3221 -82.394,8.45492 -11.6998,23.16096 -48.9521,60.48948 -83.49208,68.46717 -80.37237,18.56358 -200.18131,-6.1995 -236.81351,-26.29805 -20.1303,-11.04468 37.3603,-54.69665 59.03744,-87.62576 z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cscscssc" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-67-3"
|
||||
d="m 707.10958,256.23484 c -4.5506,-59.43449 38.9445,-170.552464 113.0356,-235.300684"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-5-6"
|
||||
d="M 906.03093,283.69912 C 748.35878,266.97103 702.49728,258.25151 644.76278,238.24248"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:#212121;fill-opacity:0.98086123;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-6-0"
|
||||
d="m 839.44847,22.359556 c 3.79974,-11.58118 71.55246,-0.42441 105.32676,31.90705 55.2181,52.859064 78.36977,184.859614 61.84477,203.456854 -11.45267,12.88898 -21.57437,23.81728 -38.81417,28.53139 -22.3413,6.10906 -33.8285,4.667 -57.7438,2.00614 -22.1644,-2.46605 -15.9509,-86.94719 -63.69658,-182.97783 -7.58963,-15.264984 -12.09994,-67.126484 -6.91698,-82.923604 z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="sssssss" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:10;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-67-5-6"
|
||||
d="m 824.79374,19.949656 c -16.18864,33.02752 -54.92826,38.49401 -61.68456,32.04878 -7.5683,-7.21981 38.17869,-57.1909599 60.55123,-31.48217 2.08865,2.40013 70.63722,20.24099 51.82062,-7.65192 -12.5868,-18.6579199 -47.69005,0.97044 -50.68729,7.08531 z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="sssss" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-67-3-3"
|
||||
d="M 644.76278,238.24248 C 657.78072,118.45146 738.1321,21.336741 824.79374,19.949656"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-67-3-7"
|
||||
d="M 832.24462,274.4174 C 826.94633,234.42287 817.24711,114.60551 824.79374,19.949656"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cc" />
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 7.9 KiB |
|
|
@ -0,0 +1,7 @@
|
|||
---
|
||||
title: 'Number of gores'
|
||||
---
|
||||
|
||||
Controls the number of panels there are in the crown
|
||||
|
||||
|
||||
|
|
@ -0,0 +1,5 @@
|
|||
---
|
||||
title: 'Head ease'
|
||||
---
|
||||
|
||||
The amount of ease around your head.
|
||||
|
|
@ -0,0 +1,130 @@
|
|||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<svg
|
||||
xmlns:dc="http://purl.org/dc/elements/1.1/"
|
||||
xmlns:cc="http://creativecommons.org/ns#"
|
||||
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
|
||||
xmlns:svg="http://www.w3.org/2000/svg"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
|
||||
xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
|
||||
version="1.1"
|
||||
width="1050.3943"
|
||||
height="400.72318"
|
||||
id="svg13134"
|
||||
sodipodi:docname="extraLength.svg"
|
||||
inkscape:version="0.92.4 (5da689c313, 2019-01-14)">
|
||||
<sodipodi:namedview
|
||||
pagecolor="#ffffff"
|
||||
bordercolor="#666666"
|
||||
borderopacity="1"
|
||||
objecttolerance="10"
|
||||
gridtolerance="10"
|
||||
guidetolerance="10"
|
||||
inkscape:pageopacity="0"
|
||||
inkscape:pageshadow="2"
|
||||
inkscape:window-width="1920"
|
||||
inkscape:window-height="1015"
|
||||
id="namedview14"
|
||||
showgrid="false"
|
||||
fit-margin-top="0"
|
||||
fit-margin-left="0"
|
||||
fit-margin-right="0"
|
||||
fit-margin-bottom="0"
|
||||
inkscape:zoom="0.77663743"
|
||||
inkscape:cx="304.26789"
|
||||
inkscape:cy="379.82998"
|
||||
inkscape:window-x="0"
|
||||
inkscape:window-y="0"
|
||||
inkscape:window-maximized="1"
|
||||
inkscape:current-layer="svg13134" />
|
||||
<metadata
|
||||
id="metadata3096">
|
||||
<rdf:RDF>
|
||||
<cc:Work
|
||||
rdf:about="">
|
||||
<dc:format>image/svg+xml</dc:format>
|
||||
<dc:type
|
||||
rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
|
||||
<dc:title></dc:title>
|
||||
</cc:Work>
|
||||
</rdf:RDF>
|
||||
</metadata>
|
||||
<defs
|
||||
id="defs13136" />
|
||||
<path
|
||||
style="fill:#212121;fill-opacity:0.98086123;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-6-3"
|
||||
d="M 216.27841,17.442486 C 285.76235,14.133576 144.28526,211.62738 71.792027,195.48226 52.813787,191.25558 70.905657,92.465876 114.52017,54.260666 c 45.59634,-39.94121 81.24825,-35.84146 101.75824,-36.81818 z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="ssss" />
|
||||
<path
|
||||
style="fill:#212121;fill-opacity:0.98086123;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674"
|
||||
d="M 65.247037,228.47696 C 57.814397,82.580296 146.92406,19.159706 227.94827,17.133726 416.98378,12.406986 428.6865,225.81977 428.6865,225.81977 c 6.21243,1.59293 98.63729,77.15338 -19.77735,39.65891 -16.93044,-5.36081 -32.00111,11.3221 -82.39397,8.45492 -11.69981,23.16096 -48.95213,60.48948 -83.49208,68.46717 C 162.65073,360.96435 42.841827,336.20127 6.2096769,316.10272 -13.920643,305.05804 43.569907,261.40607 65.247037,228.47696 Z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cscscssc" />
|
||||
<g
|
||||
transform="matrix(0.991716,0,0,0.991716,199.88965,512.89649)"
|
||||
style="fill:#212121;stroke:#545454"
|
||||
id="g4303" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-67"
|
||||
d="M 127.59385,246.1685 C 123.04328,186.73401 166.53834,85.916856 240.62943,21.168636"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-5"
|
||||
d="M 326.51518,273.9336 C 168.84303,257.20551 122.98154,248.48599 65.247037,228.47696"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:#212121;fill-opacity:0.98086123;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-6"
|
||||
d="m 259.93272,22.594036 c 3.79974,-11.58118 71.55244,-0.42441 105.32678,31.90705 55.21804,52.859064 78.36975,174.859614 61.84481,193.456854 -11.45276,12.88898 -21.57439,23.81728 -38.81422,28.53139 -22.34126,6.10906 -33.82853,4.667 -57.7438,2.00614 C 308.3819,276.02942 314.59538,201.54828 266.8497,105.51764 259.26007,90.252656 254.74976,38.391156 259.93272,22.594036 Z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="sssssss" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:10;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-67-5"
|
||||
d="m 245.27799,20.184136 c -16.18864,33.02752 -54.92821,38.49401 -61.68452,32.04878 -7.56831,-7.21981 38.17865,-57.1909599 60.55119,-31.48217 2.08865,2.40013 70.63727,20.24099 51.82058,-7.65192 -12.58672,-18.6579199 -47.69001,0.97044 -50.68725,7.08531 z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="sssss" />
|
||||
<path
|
||||
style="fill:#212121;fill-opacity:0.98086123;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-6-3-0"
|
||||
d="m 795.79416,17.208006 c 69.48397,-3.30891 -71.99318,194.184894 -144.48638,178.039774 -18.9783,-4.22668 -0.8864,-103.016384 42.7281,-141.221594 45.5964,-39.94121 81.2483,-35.84146 101.75828,-36.81818 z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="ssss" />
|
||||
<path
|
||||
style="fill:#212121;fill-opacity:0.98086123;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-9"
|
||||
d="M 644.76278,278.24248 C 626.25969,132.34582 704.02362,18.925226 807.46402,16.899246 996.52236,13.196356 1008.2022,275.58529 1008.2022,275.58529 c 6.2124,1.59293 98.6373,77.15338 -19.77727,39.65891 -16.9305,-5.36081 -32.0011,11.3221 -82.394,8.45492 -11.6998,23.16096 -48.9521,60.48948 -83.49208,68.46717 -80.37237,18.56358 -200.18131,-6.1995 -236.81351,-26.29805 -20.1303,-11.04468 37.3603,-54.69665 59.03744,-87.62576 z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cscscssc" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-67-3"
|
||||
d="M 721.2732,301.30092 C 716.7226,239.83137 746.05408,69.292871 820.14518,20.934156"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-5-6"
|
||||
d="M 906.03093,323.69912 C 748.35878,306.97103 702.49728,298.25151 644.76278,278.24248"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:#212121;fill-opacity:0.98086123;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-6-0"
|
||||
d="m 839.44847,22.359556 c 3.79974,-11.58118 71.55246,-0.42441 105.32676,31.90705 55.2181,52.859064 78.36977,226.859614 61.84477,245.456854 -11.45267,12.88898 -21.57437,23.81728 -38.81417,28.53139 -22.3413,6.10906 -33.8285,4.667 -57.7438,2.00614 -22.1644,-2.46605 -15.9509,-128.94719 -63.69658,-224.97783 -7.58963,-15.264984 -12.09994,-67.126484 -6.91698,-82.923604 z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="sssssss" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:10;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-67-5-6"
|
||||
d="m 824.79374,19.949656 c -16.18864,33.02752 -54.92826,38.49401 -61.68456,32.04878 -7.5683,-7.21981 38.17869,-57.1909599 60.55123,-31.48217 2.08865,2.40013 70.63722,20.24099 51.82062,-7.65192 -12.5868,-18.6579199 -47.69005,0.97044 -50.68729,7.08531 z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="sssss" />
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 7.3 KiB |
|
|
@ -0,0 +1,5 @@
|
|||
---
|
||||
title: 'Length ratio'
|
||||
---
|
||||
|
||||
Controls the length of the crown and ear flaps
|
||||
|
|
@ -0,0 +1,130 @@
|
|||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<svg
|
||||
xmlns:dc="http://purl.org/dc/elements/1.1/"
|
||||
xmlns:cc="http://creativecommons.org/ns#"
|
||||
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
|
||||
xmlns:svg="http://www.w3.org/2000/svg"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
|
||||
xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
|
||||
version="1.1"
|
||||
width="1058.7223"
|
||||
height="369.78207"
|
||||
id="svg13134"
|
||||
sodipodi:docname="brimangle.svg"
|
||||
inkscape:version="0.92.4 (5da689c313, 2019-01-14)">
|
||||
<sodipodi:namedview
|
||||
pagecolor="#ffffff"
|
||||
bordercolor="#666666"
|
||||
borderopacity="1"
|
||||
objecttolerance="10"
|
||||
gridtolerance="10"
|
||||
guidetolerance="10"
|
||||
inkscape:pageopacity="0"
|
||||
inkscape:pageshadow="2"
|
||||
inkscape:window-width="1920"
|
||||
inkscape:window-height="1015"
|
||||
id="namedview14"
|
||||
showgrid="false"
|
||||
fit-margin-top="0"
|
||||
fit-margin-left="0"
|
||||
fit-margin-right="0"
|
||||
fit-margin-bottom="0"
|
||||
inkscape:zoom="1.3111243"
|
||||
inkscape:cx="527.95302"
|
||||
inkscape:cy="194.92854"
|
||||
inkscape:window-x="0"
|
||||
inkscape:window-y="0"
|
||||
inkscape:window-maximized="1"
|
||||
inkscape:current-layer="svg13134" />
|
||||
<metadata
|
||||
id="metadata3096">
|
||||
<rdf:RDF>
|
||||
<cc:Work
|
||||
rdf:about="">
|
||||
<dc:format>image/svg+xml</dc:format>
|
||||
<dc:type
|
||||
rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
|
||||
<dc:title></dc:title>
|
||||
</cc:Work>
|
||||
</rdf:RDF>
|
||||
</metadata>
|
||||
<defs
|
||||
id="defs13136" />
|
||||
<path
|
||||
style="fill:#212121;fill-opacity:0.98086123;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-6-3"
|
||||
d="M 239.63888,17.442486 C 309.12282,14.133576 167.64573,211.62738 95.152493,195.48226 76.174253,191.25558 94.266123,92.465876 137.88064,54.260666 c 45.59634,-39.94121 81.24825,-35.84146 101.75824,-36.81818 z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="ssss" />
|
||||
<path
|
||||
style="fill:#212121;fill-opacity:0.98086123;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674"
|
||||
d="M 88.607503,238.47696 C 81.174863,92.580296 170.28453,19.159706 251.30874,17.133726 440.34425,12.406986 434.50477,214.46405 434.50477,214.46405 c 4.42809,-11.49225 106.83797,30.00462 -2.23515,61.01463 -17.08194,4.85648 -32.00111,11.3221 -82.39397,8.45492 -37.63175,17.82203 -92.55368,35.96049 -167.38954,44.06064 C 117.26012,335.05423 17.870374,301.47395 2.8754956,282.62858 -6.4267404,270.93765 54.706283,255.51536 88.607503,238.47696 Z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cscscssc" />
|
||||
<g
|
||||
transform="matrix(0.991716,0,0,0.991716,223.25012,512.89649)"
|
||||
style="fill:#212121;stroke:#545454"
|
||||
id="g4303" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-67"
|
||||
d="M 150.95432,256.46932 C 146.40375,197.03483 189.89881,85.916856 263.9899,21.168636"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-5"
|
||||
d="M 349.87565,283.9336 C 192.2035,267.20551 146.34201,258.48599 88.607503,238.47696"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:#212121;fill-opacity:0.98086123;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-6"
|
||||
d="m 283.29319,22.594036 c 3.79974,-11.58118 71.55244,-0.42441 105.32678,31.90705 55.21804,52.859064 78.36975,184.859614 61.84481,203.456854 -11.45276,12.88898 -21.57439,23.81728 -38.81422,28.53139 -22.34126,6.10906 -33.82853,4.667 -57.7438,2.00614 -22.16439,-2.46605 -15.95091,-86.94719 -63.69659,-182.97783 -7.58963,-15.264984 -12.09994,-67.126484 -6.91698,-82.923604 z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="sssssss" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:10;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-67-5"
|
||||
d="m 268.63846,20.184136 c -16.18864,33.02752 -54.92821,38.49401 -61.68452,32.04878 -7.56831,-7.21981 38.17865,-57.1909599 60.55119,-31.48217 2.08865,2.40013 70.63727,20.24099 51.82058,-7.65192 -12.58672,-18.6579199 -47.69001,0.97044 -50.68725,7.08531 z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="sssss" />
|
||||
<path
|
||||
style="fill:#212121;fill-opacity:0.98086123;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-6-3-0"
|
||||
d="M 819.15463,17.208006 C 888.6386,13.899096 747.16145,211.3929 674.66825,195.24778 c -18.9783,-4.22668 -0.8864,-103.016384 42.7281,-141.221594 45.5964,-39.94121 81.2483,-35.84146 101.75828,-36.81818 z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="ssss" />
|
||||
<path
|
||||
style="fill:#212121;fill-opacity:0.98086123;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-9"
|
||||
d="M 668.12325,238.24248 C 660.69065,92.345816 749.80025,18.925226 830.82449,16.899246 1019.86,12.172506 1031.5627,235.58529 1031.5627,235.58529 c 6.1886,1.60553 63.9213,95.53241 -19.7773,39.65891 -14.77027,-9.85998 -32.0011,11.3221 -82.394,8.45492 -11.6998,23.16096 -22.36308,77.97434 -57.56014,82.19585 -70.33596,8.43604 -192.51267,-13.11274 -229.94917,-32.39969 -20.41154,-10.51584 4.56402,-62.32369 26.24116,-95.2528 z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cscscssc" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-67-3"
|
||||
d="m 730.47005,256.23484 c -4.5506,-59.43449 38.9445,-170.552464 113.0356,-235.300684"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-5-6"
|
||||
d="M 929.3914,283.69912 C 771.71925,266.97103 725.85775,258.25151 668.12325,238.24248"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:#212121;fill-opacity:0.98086123;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-6-0"
|
||||
d="m 862.80894,22.359556 c 3.79974,-11.58118 71.55246,-0.42441 105.32676,31.90705 55.2181,52.859064 78.3698,184.859614 61.8448,203.456854 -11.4527,12.88898 -21.5744,23.81728 -38.8142,28.53139 -22.3413,6.10906 -33.8285,4.667 -57.7438,2.00614 -22.1644,-2.46605 -15.9509,-86.94719 -63.69658,-182.97783 -7.58963,-15.264984 -12.09994,-67.126484 -6.91698,-82.923604 z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="sssssss" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:10;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-67-5-6"
|
||||
d="m 848.15421,19.949656 c -16.18864,33.02752 -54.92826,38.49401 -61.68456,32.04878 -7.5683,-7.21981 38.17869,-57.1909599 60.55123,-31.48217 2.08865,2.40013 70.63722,20.24099 51.82062,-7.65192 -12.5868,-18.6579199 -47.69005,0.97044 -50.68729,7.08531 z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="sssss" />
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 7.3 KiB |
|
|
@ -0,0 +1,5 @@
|
|||
---
|
||||
title: 'Visor angle'
|
||||
---
|
||||
|
||||
The arc angle used to draft the inner curve of the visor
|
||||
|
|
@ -0,0 +1,5 @@
|
|||
---
|
||||
title: 'Visor length'
|
||||
---
|
||||
|
||||
Controls the length of the visor
|
||||
|
|
@ -0,0 +1,130 @@
|
|||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<svg
|
||||
xmlns:dc="http://purl.org/dc/elements/1.1/"
|
||||
xmlns:cc="http://creativecommons.org/ns#"
|
||||
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
|
||||
xmlns:svg="http://www.w3.org/2000/svg"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
|
||||
xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
|
||||
version="1.1"
|
||||
width="1036.226"
|
||||
height="379.24622"
|
||||
id="svg13134"
|
||||
sodipodi:docname="brimlength.svg"
|
||||
inkscape:version="0.92.4 (5da689c313, 2019-01-14)">
|
||||
<sodipodi:namedview
|
||||
pagecolor="#ffffff"
|
||||
bordercolor="#666666"
|
||||
borderopacity="1"
|
||||
objecttolerance="10"
|
||||
gridtolerance="10"
|
||||
guidetolerance="10"
|
||||
inkscape:pageopacity="0"
|
||||
inkscape:pageshadow="2"
|
||||
inkscape:window-width="1920"
|
||||
inkscape:window-height="1015"
|
||||
id="namedview14"
|
||||
showgrid="false"
|
||||
fit-margin-top="0"
|
||||
fit-margin-left="0"
|
||||
fit-margin-right="0"
|
||||
fit-margin-bottom="0"
|
||||
inkscape:zoom="1.3569363"
|
||||
inkscape:cx="518.14713"
|
||||
inkscape:cy="190.88463"
|
||||
inkscape:window-x="0"
|
||||
inkscape:window-y="0"
|
||||
inkscape:window-maximized="1"
|
||||
inkscape:current-layer="svg13134" />
|
||||
<metadata
|
||||
id="metadata3096">
|
||||
<rdf:RDF>
|
||||
<cc:Work
|
||||
rdf:about="">
|
||||
<dc:format>image/svg+xml</dc:format>
|
||||
<dc:type
|
||||
rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
|
||||
<dc:title></dc:title>
|
||||
</cc:Work>
|
||||
</rdf:RDF>
|
||||
</metadata>
|
||||
<defs
|
||||
id="defs13136" />
|
||||
<path
|
||||
style="fill:#212121;fill-opacity:0.98086123;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-6-3"
|
||||
d="M 185.79963,17.442486 C 255.28357,14.133576 113.80648,211.62738 41.313244,195.48226 22.335004,191.25558 40.426874,92.465876 84.041387,54.260666 129.63773,14.319456 165.28964,18.419206 185.79963,17.442486 Z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="ssss" />
|
||||
<path
|
||||
style="fill:#212121;fill-opacity:0.98086123;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674"
|
||||
d="M 34.768254,238.47696 C 27.335614,92.580296 116.44528,19.159706 197.46949,17.133726 386.505,12.406986 398.20772,235.81977 398.20772,235.81977 c 1.40857,-1.85331 51.55552,43.37733 -19.77735,39.65891 -17.73481,-0.92447 -32.00111,11.3221 -82.39397,8.45492 -11.69981,23.16096 -32.47468,46.03009 -67.91594,46.78453 C 151.13304,332.35696 46.486962,313.58168 9.7308938,294.10272 -10.557363,283.35091 13.091124,271.40607 34.768254,238.47696 Z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cscscssc" />
|
||||
<g
|
||||
transform="matrix(0.991716,0,0,0.991716,169.41087,512.89649)"
|
||||
style="fill:#212121;stroke:#545454"
|
||||
id="g4303" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-67"
|
||||
d="M 97.115067,256.46932 C 92.564497,197.03483 136.05956,85.916856 210.15065,21.168636"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-5"
|
||||
d="M 296.0364,283.9336 C 138.36425,267.20551 92.502757,258.48599 34.768254,238.47696"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:#212121;fill-opacity:0.98086123;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-6"
|
||||
d="m 229.45394,22.594036 c 3.79974,-11.58118 71.55244,-0.42441 105.32678,31.90705 55.21804,52.859064 78.36975,184.859614 61.84481,203.456854 -11.45276,12.88898 -21.57439,23.81728 -38.81422,28.53139 -22.34126,6.10906 -33.82853,4.667 -57.7438,2.00614 -22.16439,-2.46605 -15.95091,-86.94719 -63.69659,-182.97783 -7.58963,-15.264984 -12.09994,-67.126484 -6.91698,-82.923604 z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="sssssss" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:10;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-67-5"
|
||||
d="m 214.79921,20.184136 c -16.18864,33.02752 -54.92821,38.49401 -61.68452,32.04878 -7.56831,-7.21981 38.17865,-57.1909599 60.55119,-31.48217 2.08865,2.40013 70.63727,20.24099 51.82058,-7.65192 -12.58672,-18.6579199 -47.69001,0.97044 -50.68725,7.08531 z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="sssss" />
|
||||
<path
|
||||
style="fill:#212121;fill-opacity:0.98086123;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-6-3-0"
|
||||
d="M 765.31538,17.208006 C 834.79935,13.899096 693.3222,211.3929 620.829,195.24778 601.8507,191.0211 619.9426,92.231396 663.5571,54.026186 c 45.5964,-39.94121 81.2483,-35.84146 101.75828,-36.81818 z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="ssss" />
|
||||
<path
|
||||
style="fill:#212121;fill-opacity:0.98086123;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-9"
|
||||
d="M 614.284,238.24248 C 606.8514,92.345816 695.961,18.925226 776.98524,16.899246 966.02075,12.172506 977.72342,235.58529 977.72342,235.58529 c 8.7242,2.77493 134.32738,93.94871 -19.77727,39.65891 -16.74992,-5.90086 -32.0011,11.3221 -82.394,8.45492 -11.6998,23.16096 -52.42388,79.4373 -86.96386,87.41499 -80.37237,18.56358 -212.70953,-9.14732 -249.34173,-29.24587 -20.1303,-11.04468 53.3603,-70.69665 75.03744,-103.62576 z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cscscssc" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-67-3"
|
||||
d="M 676.6308,256.23484 C 672.0802,196.80035 715.5753,85.682376 789.6664,20.934156"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-5-6"
|
||||
d="M 875.55215,283.69912 C 717.88,266.97103 672.0185,258.25151 614.284,238.24248"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="cc" />
|
||||
<path
|
||||
style="fill:#212121;fill-opacity:0.98086123;stroke:#545454;stroke-width:4;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-6-0"
|
||||
d="m 808.96969,22.359556 c 3.79974,-11.58118 71.55246,-0.42441 105.32676,31.90705 55.2181,52.859064 78.36977,184.859614 61.84477,203.456854 -11.45267,12.88898 -21.57437,23.81728 -38.81417,28.53139 -22.3413,6.10906 -33.8285,4.667 -57.7438,2.00614 -22.1644,-2.46605 -15.9509,-86.94719 -63.69658,-182.97783 -7.58963,-15.264984 -12.09994,-67.126484 -6.91698,-82.923604 z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="sssssss" />
|
||||
<path
|
||||
style="fill:none;fill-opacity:1;stroke:#545454;stroke-width:10;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
|
||||
id="rect4674-67-5-6"
|
||||
d="m 794.31496,19.949656 c -16.18864,33.02752 -54.92826,38.49401 -61.68456,32.04878 -7.5683,-7.21981 38.17869,-57.1909599 60.55123,-31.48217 2.08865,2.40013 70.63722,20.24099 51.82062,-7.65192 -12.5868,-18.6579199 -47.69005,0.97044 -50.68729,7.08531 z"
|
||||
inkscape:connector-curvature="0"
|
||||
sodipodi:nodetypes="sssss" />
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 7.3 KiB |
|
|
@ -0,0 +1,5 @@
|
|||
---
|
||||
title: 'Visor width'
|
||||
---
|
||||
|
||||
Controls the width of the visor
|
||||
155
sites/orgdocs/docs/designs/holmes/readme.mdx
Normal file
155
sites/orgdocs/docs/designs/holmes/readme.mdx
Normal file
|
|
@ -0,0 +1,155 @@
|
|||
---
|
||||
title: "Holmes: FreeSewing's Holmes Deerstalker Hat"
|
||||
sidebar_label: Holmes Deerstalker Hat
|
||||
---
|
||||
|
||||
<DesignInfo design="holmes" />
|
||||
|
||||
## Designer Notes {#notes}
|
||||
|
||||
The idea of Holmes hat came from [a YouTube
|
||||
video](https://www.youtube.com/watch?v=H24VBFMZJF4) I was watching once, in
|
||||
which Bernadette Banner is making a Sherlock Holmes deerstalker hat, and
|
||||
struggles to find the right shape of the gores to form the dome shape, which
|
||||
ends up doing by trial and error.
|
||||
|
||||
As a physicist, I cannot justify solving a problem with an iterative process
|
||||
when there's an analytical solution, so I just calculated the shape needed, and
|
||||
implemented it in a Freesewing pattern, creating a plugin to calculate gore
|
||||
shapes.
|
||||
|
||||
The name was an easy choice, I just needed a name starting with H for a
|
||||
Sherlock Holmes hat :smiley:
|
||||
|
||||
Erica
|
||||
|
||||
## What You Need {#needs}
|
||||
|
||||
To make Holmes, you will need the following:
|
||||
|
||||
- Basic sewing supplies
|
||||
- About 0.5 metres (0.6 yards) of a suitable fabric (see [Fabric
|
||||
Otions](#fabric))
|
||||
- About 0.5 metres (0.6 yards) of lining fabric (see [Fabric Options](#fabric))
|
||||
- A rigid material for the visor insert (see [Fabric Options](#fabric))
|
||||
- (Optional) About 1 metre of 1" (2.5cm) crossgrain ribbon or petersham.
|
||||
- (Optional) 1 covered button about 3/4" (2cm) - 7/8" (2.2cm)
|
||||
|
||||
:::note
|
||||
Depending on style the ties and buttons are optional.
|
||||
|
||||
- If you are making Buttonhole Ear Flaps you can omit the ties.
|
||||
- If you are making Tie Ear Flaps you can omit the button.
|
||||
- Ties can also be made from fabric if you prefer ([see Holmes
|
||||
Cutting](/docs/designs/holmes/cutting/))
|
||||
- You can also use different width and type ribbons for the ties if you prefer.
|
||||
:::
|
||||
|
||||
## Fabric Options {#fabric}
|
||||
|
||||
### Main Fabric
|
||||
|
||||
For the main fabric of your hat, a thick fabric will work best to hold the
|
||||
shape but if you wanna go for a lighter fabric you can interface it to give it
|
||||
more body. Generally you want to use **wools** of coating weight but you can
|
||||
experiment with different weights and fabrics with the relevant interfacing.
|
||||
|
||||
:::tip
|
||||
A fun thing to try is printed cotton. Just double up the main fabric so each
|
||||
piece is double thickness. Then interface it with a **medium firm
|
||||
interfacing**.
|
||||
:::
|
||||
|
||||
### Lining Fabric
|
||||
|
||||
Generally you want a lightweight fabric such as **Silks** or **Cotton Lawn**
|
||||
but really you can make it from any fabric you deem appropriate for lining.
|
||||
Just remember it needs to protect the facing and the main fabric from your
|
||||
head.
|
||||
|
||||
### Interfacing
|
||||
|
||||
Depending on your main fabric's thickness and how well it keeps its shape you
|
||||
may need to interface your fabric. If you are uncertain of whether your fabric
|
||||
requires interfacing, quickly _baste_ your crown pieces together and see if the
|
||||
crown stays up right when placed on a surface. If it doesn't it needs
|
||||
interfacing.
|
||||
|
||||
As a rule of thumb you will generally need a **Medium Firm
|
||||
Interfacing** but if your fabric is quite thin you may need a firmer
|
||||
interfacing. If you are still uncertain you can face your crown pieces and once
|
||||
again _baste_ the crown pieces together and check how it looks on your head.
|
||||
|
||||
You can either use fusible or non-fusible interfacing. If using non-fusible
|
||||
interfacing you will want to flat line the interfacing to your pieces wih
|
||||
temporary _pad stitches_.
|
||||
|
||||
:::tip
|
||||
If you are trying to make a more Historical Holmes you can use **Tarlatan**
|
||||
which is a lightweight stiffened muslin. Just make sure you use natural fibres.
|
||||
:::
|
||||
|
||||
### Visor Insert
|
||||
|
||||
For the visor insert you want a firm but thin material. You may want to try
|
||||
either, **Millinery Buckram**, **Plastic Canvas**, **Plastic Sheets** or **EVA
|
||||
Foam**. You can use **Leather** just know that depending on depth this may
|
||||
create a thicker visor and may make the visor harder to close.
|
||||
|
||||
:::note
|
||||
Just remember. All of these are recommendations. If you want to use something
|
||||
different go for it!
|
||||
:::
|
||||
|
||||
## Cutting Instructions {#cutting}
|
||||
|
||||
:::warning
|
||||
The **crown** pattern piece needs to be cut on the fold to create a whole
|
||||
piece.
|
||||
:::
|
||||
|
||||
### Materials
|
||||
|
||||
- **Main fabric**
|
||||
- Cut the amount of **crowns** you selected in the pattern options
|
||||
- Cut **4 ear** parts or Cut **2 ear** from main and lining.
|
||||
- Cut **4 visor** parts
|
||||
- **Lining fabric**
|
||||
- Cut the amount of **crowns** you selected in the pattern options
|
||||
- **Visor Insert Material**
|
||||
- Cut **2 visor inserts**. Use your visor pattern piece with no seam
|
||||
allowance.
|
||||
|
||||
### Optional Fabric Ties
|
||||
|
||||
If you don't wish to use ribbon for your ties you can make them out of fabric.
|
||||
|
||||
Simply cut 4 crossgrain strips of an 1" (2.5cm) or width of your chosen seam
|
||||
allowances wide and sew two tubes leaving one of the short sides open for
|
||||
turning. Clip the corners and trim seams. Turn out an press. If desired you can
|
||||
_Edgestitch_ or _Topstitch_ the tubes to stop the fabric from shifting. The raw
|
||||
edge of the tubes can then be concealed in the ear flap seam when constructing
|
||||
the ear flaps.
|
||||
|
||||
:::note
|
||||
It is recommended to draft the pattern nett and use the pattern to trace the
|
||||
seam lines onto fabric and add the seam allowance on the fabric rather than the
|
||||
pattern. This to allow for a more precise sew which is needed for a hat.
|
||||
|
||||
Recommended seam allowance 1/4" (6mm) on the sides of the crowns, ear flaps and
|
||||
outer curve of the visors. 1/2" (1.3cm) for the bottom of the crowns, ear flaps
|
||||
and inner curve of the visors. With these seam allowances you will not have to
|
||||
trim the allowances if you do not want to.
|
||||
:::
|
||||
|
||||
:::warning
|
||||
It is recommended to make a mock-up with your crown pattern first before
|
||||
cutting your fabrics. This is to test the length and ease of the crown piece.
|
||||
Make sure to cut off the bottom seam allowance before trying it on. If it is
|
||||
too tight who will need to re-draft the pattern with more head ease just
|
||||
remember the ease is split across each crown.
|
||||
|
||||
If the peak is too high you may want to re-draft the pattern with the crown
|
||||
length reduced. Once re-drafted make another mock-up to check whether you are
|
||||
satisfied with the changes or not. Repeat again if you are not satisfied.
|
||||
:::
|
||||
101
sites/orgdocs/docs/designs/jane/instructions/readme.mdx
Normal file
101
sites/orgdocs/docs/designs/jane/instructions/readme.mdx
Normal file
|
|
@ -0,0 +1,101 @@
|
|||
---
|
||||
title: "Jane 1790's Shift: Sewing Instructions"
|
||||
sidebar_label: Sewing Instructions
|
||||
sidebar_position: 20
|
||||
---
|
||||
|
||||
You can sew your Jane entirely by machine, or by hand. But it is also possible
|
||||
to mix and match techniques to your liking. It is common practice for modern
|
||||
makers of historical clothing to sew the seams by machine but finish them by
|
||||
hand.
|
||||
|
||||
Extant examples are stitched very finely to allow them to stand up to harsh
|
||||
laundering practices. You can stitch your seams with a backstitch and then
|
||||
finish them with a felling stitch.
|
||||
|
||||
The shift Jane was based on is sewn with a technique called _double felling_ or
|
||||
_german hemming_. This was a common technique for constructing shifts circa
|
||||
1750s - 1850s so it is a good choice when making a historical Jane. The benefit
|
||||
of this technique is that it allows you to stitch and finish the seam at the
|
||||
same time.
|
||||
|
||||
:::tip How to double fell
|
||||
|
||||
- Baste the seam allowance to outside on one piece. (_good side_)
|
||||
- Baste the seam allowance to the inside the other piece. (_wrong side_)
|
||||
- With _good sides facing up_, pin the piece with the edge folded to the inside
|
||||
over the top of the piece with edge folded to the outside, making sure to
|
||||
line the folded edge up with the raw edge.
|
||||
- Fell the folded edge on the outside down.
|
||||
- Fell the folded edge on the inside down.
|
||||
- Remove basting threads
|
||||
:::
|
||||
|
||||
:::warning
|
||||
It is important to line the weave up of the two pieces when pinning together.
|
||||
You can find out [more about double felling
|
||||
here](https://www.sewncompany.com/felled-seam-german-hemming).
|
||||
:::
|
||||
|
||||
## Step 1: Hem the neckline
|
||||
|
||||
Hem the neckline with the smallest hem you can manage.
|
||||
|
||||
## Step 2: Prep the Sleeves
|
||||
|
||||
- Fold the sleeve in half from the shoulder to the hem.
|
||||
- Sew the sleeve together to create a tube, making sure to leave the width of
|
||||
the sleeve gusset open at the top.
|
||||
- Finish the seam.
|
||||
- Sew one of the sleeve gusset edges to one side of the gap left in the seam
|
||||
you've just sewn.
|
||||
- Take the edge of the sleeve gusset that is adjacent to the one you've just
|
||||
sewn and sew it to the gap on the other side of the sleeve. You should now be
|
||||
looking at a diamond with the top two edges connected to the sleeve and the
|
||||
bottom two edges free.
|
||||
- Finish the seams.
|
||||
- Repeat for the second sleeve.
|
||||
- Hem the bottom of the sleeves.
|
||||
|
||||
## Step 3: Prep the side gores
|
||||
|
||||
- Sew the two side gores together along the longest straight edges to create a
|
||||
kite.
|
||||
- Finish the seam.
|
||||
- Repeat for other set of side gores.
|
||||
|
||||
## Step 4: Prep the Body
|
||||
|
||||
- Mark down from the shoulder, along the side seam, half the total width of the
|
||||
sleeve + the sleeve gusset width.
|
||||
- Sew the front of the body to the back of the body from the mark, down to the
|
||||
corner where the body runs parallel to the grain.
|
||||
- Repeat for the 3 remaining side seams.
|
||||
|
||||
## Step 5: Set in the side gores
|
||||
|
||||
- Sew the side gore to the front and then to back along the edges that were
|
||||
left free from the corner to bottom of the body.
|
||||
- Finish the seams.
|
||||
- Repeat for other side gore.
|
||||
|
||||
## Step 6: Set in the sleeves
|
||||
|
||||
- Sew the sleeve to the body matching the notch to the shoulder. The sleeve
|
||||
should fit in the gap that has been left in the side seam. Make sure to not
|
||||
sew the sleeve shut when attaching.
|
||||
- Finish the seam.
|
||||
- Repeat for the other sleeve.
|
||||
|
||||
:::tip
|
||||
You may find it easier to turn the body _wrong sides_ out for this. It will
|
||||
depend on your construction method though.
|
||||
:::
|
||||
|
||||
## Step 7: Hemming
|
||||
|
||||
Hem the bottom of your shift.
|
||||
|
||||
## Step 8: Enjoy!
|
||||
|
||||
Now go forth and wear it as a historical undergarment or however you like!
|
||||
|
|
@ -0,0 +1,7 @@
|
|||
---
|
||||
title: Biceps Ease
|
||||
---
|
||||
|
||||
This option controls the amount of ease in the sleeve circumference. The
|
||||
default is for the historically accurate version of a regency sleeve, which is
|
||||
fairly tight to the arm.
|
||||
|
|
@ -0,0 +1,6 @@
|
|||
---
|
||||
title: Body Ease
|
||||
---
|
||||
|
||||
The Body Ease option controls how wide the shift is on your body. The default
|
||||
is for a shift that is fairly tight but you can still easily move in.
|
||||
|
|
@ -0,0 +1,7 @@
|
|||
---
|
||||
title: Gusset Size
|
||||
---
|
||||
|
||||
This option controls the size of the gusset, a larger gusset will give you more
|
||||
freedom of movement and gives a little extra width in the sleeve at the top of
|
||||
the bicep.
|
||||
|
|
@ -0,0 +1,6 @@
|
|||
---
|
||||
title: Neckline Depth Back
|
||||
---
|
||||
|
||||
This option controls how deep the back neckline is. A historical shift would be
|
||||
low enough to be below the neckline of the dress it goes under.
|
||||
|
|
@ -0,0 +1,6 @@
|
|||
---
|
||||
title: Neckline Depth Front
|
||||
---
|
||||
|
||||
This option controls how deep the front neckline is. A historical shift would
|
||||
have a neckline that comes to the top of the stays.
|
||||
|
|
@ -0,0 +1,6 @@
|
|||
---
|
||||
title: Neckline Width
|
||||
---
|
||||
|
||||
This option controls how wide the neckline is. On a historical shift this would
|
||||
be wide enough to not peek out of the dress neckline.
|
||||
|
|
@ -0,0 +1,6 @@
|
|||
---
|
||||
title: Shift Length
|
||||
---
|
||||
|
||||
This option controls the overall length of the shift. Historical shifts have
|
||||
different lengths, anywhere between knee and calf would be appropriate.
|
||||
|
|
@ -0,0 +1,6 @@
|
|||
---
|
||||
title: Sleeve Length
|
||||
---
|
||||
|
||||
This option controls the extra length added to the sleeve. If you want a length
|
||||
appropriate for 1790's then you don't use this option.
|
||||
136
sites/orgdocs/docs/designs/jane/readme.mdx
Normal file
136
sites/orgdocs/docs/designs/jane/readme.mdx
Normal file
|
|
@ -0,0 +1,136 @@
|
|||
---
|
||||
title: "Jane: FreeSewing's Jane 1790's Shift"
|
||||
sidebar_label: "Jane 1790's Shift"
|
||||
---
|
||||
|
||||
<DesignInfo design="jane" />
|
||||
|
||||
## Designer Notes {#notes}
|
||||
|
||||
I made Jane because shifts are a very fundamental part of historical sewing but
|
||||
its hard to make or find a pattern that works for you.
|
||||
|
||||
A lot of blogs have instructions for drafting, but drafting can be
|
||||
overwhelming. Freesewing allowed me to code a pattern that is sized to your
|
||||
body without you having to do all the work of drafting.
|
||||
|
||||
The shift Jane is based on is one I made following [Sharon Ann Burnstons
|
||||
instructions](http://sharonburnston.com/). Her work got me interested in shifts
|
||||
and the details and minutia of making one that does what you want it to do.
|
||||
|
||||
I wanted to make Jane to give people a great place to start their historical
|
||||
sewing journey, a pattern that is easy to use and lets you move on to the
|
||||
exciting things if you feel that way or play around in the world of squarecut
|
||||
garments like I have.
|
||||
|
||||
Zee
|
||||
|
||||
## What You Need {#needs}
|
||||
|
||||
To determine how much fabric you need for Jane you take:
|
||||
|
||||
- Twice the length of your body pattern piece + the length of your sleeve
|
||||
pattern piece.
|
||||
- If your sleeves and gussets can fit alongside the maximum width of your body
|
||||
pattern piece, then twice the length of the body pattern piece will be
|
||||
enough.
|
||||
|
||||
This makes the total amount of fabric needed for Jane as the a-line shape is
|
||||
created by taking away fabric at the top of the shift and adding it to the
|
||||
bottom. Depending on how you cut the neckhole, it is possible to take the
|
||||
gussets out of that leftover fabric.
|
||||
|
||||
If you are sewing a historically accurate Jane you will want the following for
|
||||
your sewing supplies:
|
||||
|
||||
- A fine linen thread (2/80 or 2/90, finer if comfortable)
|
||||
- Handsewing needles you find work with your size thread
|
||||
- Beeswax for waxing thread
|
||||
- A thimble is recommended for comfortable handsewing
|
||||
|
||||
If you are working with a sewing machine or not constrained by historical
|
||||
accuracy you will want some [basic sewing
|
||||
supplies](/docs/sewing/basic-sewing-supplies).
|
||||
|
||||
## Fabric Options {#fabric}
|
||||
|
||||
### Historically Accurate Fabrics
|
||||
|
||||
During the Regency period shifts were made out of white linen. If you want to
|
||||
sew a historically accurate Jane, linen is the only choice you have. Linen is a
|
||||
fabric that could withstand the harsh laundry methods of the past better than
|
||||
silk or wool. Because shifts would be washed more than the clothing that went
|
||||
over them, the way the fabric laundered was a priority. Over time, white linens
|
||||
came to represent cleanliness,and could be easily rid of stains by bleaching.
|
||||
|
||||
Additionally, the weave would universally be a plain or tabby weave. What would
|
||||
vary is the weight of linen used. Everyone wore body linen, to not wear it
|
||||
wasn’t permissible.
|
||||
|
||||
This meant that poorer people might use a coarser woven linen which was
|
||||
generally cheaper than someone with a lot of money who could afford finer woven
|
||||
linen. Additionally, unbleached linen was cheaper than bleached linen.
|
||||
|
||||
In your own making, it can be good to keep in mind that finer linen will often
|
||||
be sheerer and will wear more quickly. If you are making a shift to wear on a
|
||||
regular basis, a slightly heavier weight will last longer. The shift Jane was
|
||||
based on is made out of Irish linen that weighs 180 gsm or 5.3 oz/sq yd. This
|
||||
is a linen on the light side of medium weight.
|
||||
|
||||
### Non-historic fabrics
|
||||
|
||||
A Jane that isn’t historically accurate can be made out of a variety of
|
||||
fabrics. It is drafted for a woven fabric. What fabric that should be largely
|
||||
depends on preference and use. For example if you want to use Jane as a slip or
|
||||
nightgown you could make it in a soft cotton or some slinky silk. In general
|
||||
you want a fairly light weight fabric and if you want to use something heavier,
|
||||
it is smart to add more ease to the pattern. As long as you keep in mind that
|
||||
the pattern was designed for a woven you can use any fabric you want.
|
||||
|
||||
## Cutting Instructions {#cutting}
|
||||
|
||||
The best way to get a truly straight line for all the straight seams in Jane is
|
||||
to pull a thread. This is done by snipping into the fabric at the right
|
||||
measurement and then carefully pulling on the single thread that the cut
|
||||
exposes. Once pulled all the way out of the fabric it creates a void that is
|
||||
easily followed to cut a straight line.
|
||||
|
||||
There are two different ways to cut Jane, with or without a shoulder seam. The
|
||||
pattern doesn’t include a back and front to save on paper.
|
||||
|
||||
If you are cutting Jane with a shoulder seam you:
|
||||
|
||||
- Cut **1 body** part with front neckline
|
||||
- Cut **1 body** part with back neckline
|
||||
- Cut gore line in front and back parts
|
||||
- Repeat on the other side of the front and back parts
|
||||
- Cut **2 sleeve** parts
|
||||
- Cut **2 sleeve** gusset parts
|
||||
|
||||
If you want to cut Jane without a shoulder seam you:
|
||||
|
||||
- Cut **1 body** part on the fold as indicated on the pattern
|
||||
- Cut the neckline on the body part
|
||||
- With the body part folded at the fold line, cut the side gores
|
||||
- Repeat on the other side of the body part
|
||||
- Cut **2 sleeve** parts
|
||||
- Cut **2 sleeve** gusset parts
|
||||
|
||||
### Cutting out without a pattern
|
||||
|
||||
In the past shifts were generally cut without a paper pattern. If you want to
|
||||
cut without a pattern as well you can use the following instructions:
|
||||
|
||||
Cut a rectangle double the body length and the body width. You can cut the side
|
||||
gores all in one go. To do this you fold your fabric at the shoulder line and
|
||||
then mark the halfway point down the length.
|
||||
|
||||
Then you mark your shoulder width (the distance from the shoulder to the
|
||||
beginning of the dotted line). And mark the side gore by tracing a line from
|
||||
the point marked to the midpoint of the body length.
|
||||
|
||||
Then you fold the body in half widthwise. There should be 4 layers of fabric at
|
||||
the edge now. To cut the gore you now cut the line you just drew through all
|
||||
four layers.
|
||||
|
||||
Now cut the neckline, the sleeves and the sleeve gussets.
|
||||
55
sites/orgdocs/docs/designs/lucy/instructions/readme.mdx
Normal file
55
sites/orgdocs/docs/designs/lucy/instructions/readme.mdx
Normal file
|
|
@ -0,0 +1,55 @@
|
|||
---
|
||||
title: 'Lucy tie-on pocket: Sewing Instructions'
|
||||
sidebar_label: Sewing Instructions
|
||||
sidebar_position: 20
|
||||
---
|
||||
|
||||
Lucy can be sewn by hand or by machine as you prefer. When sewing by hand, you
|
||||
can use a running stitch to sew the pocket pieces together and bind with a
|
||||
whipstitch.
|
||||
|
||||
## Step 1: Constructing the Pocket
|
||||
|
||||
- Bind the pocket slit.
|
||||
- With _wrong sides together_ stitch the two pocket pieces together around the
|
||||
outside.
|
||||
- Bind the outside edge.
|
||||
|
||||
:::tip
|
||||
If you prefer you can _french seam_ the outer edges of the pocket bag together.
|
||||
:::
|
||||
|
||||
## Step 2: Binding the top edge and ties.
|
||||
|
||||
There are two methods for binding the top edge. One leaves the side edges of
|
||||
the top binding open so the ties can be threaded through. The second uses the
|
||||
tape for the ties to bind the top edge. Read through both methods carefully and
|
||||
decide which one you wish to use.
|
||||
|
||||
### Using binding
|
||||
|
||||
- Cut a piece of binding the length of the top edge + seam allowance.
|
||||
- Fold under the short edges of the binging and stitch in place.
|
||||
- Bind the top edge of the pocket bag with the prepared binding making sure
|
||||
that the folded ends are left open.
|
||||
- Thread a tie through the binding.
|
||||
- Finish the tie ends.
|
||||
|
||||
:::tip
|
||||
To make sure the binding is long enough, instead of cutting the binding down
|
||||
you can fold under one edge and stitch the binding to the top edge but before
|
||||
getting to other end fold under and trim the other edge of the binding then
|
||||
continue the stitching.
|
||||
:::
|
||||
|
||||
### Bind with the ties
|
||||
|
||||
- Use a piece of tape as binding and tie, attach the pocket bag to the centre
|
||||
of the tape.
|
||||
- Bind the top edge of the pocket bag whilst leaving the remainder of tape
|
||||
free.
|
||||
- Finish the tape ends.
|
||||
|
||||
## Step 3: Enjoy!
|
||||
|
||||
That's it! You're all done! Now go stuff your new pockets to the brim!
|
||||
5
sites/orgdocs/docs/designs/lucy/options/edge/readme.mdx
Normal file
5
sites/orgdocs/docs/designs/lucy/options/edge/readme.mdx
Normal file
|
|
@ -0,0 +1,5 @@
|
|||
---
|
||||
title: Edge
|
||||
---
|
||||
|
||||
This option controls the width of the top edge of your pocket.
|
||||
|
|
@ -0,0 +1,5 @@
|
|||
---
|
||||
title: Length
|
||||
---
|
||||
|
||||
The length option determines how long your pocket will be.
|
||||
5
sites/orgdocs/docs/designs/lucy/options/width/readme.mdx
Normal file
5
sites/orgdocs/docs/designs/lucy/options/width/readme.mdx
Normal file
|
|
@ -0,0 +1,5 @@
|
|||
---
|
||||
title: Width
|
||||
---
|
||||
|
||||
This option determines the width of the pocket overall.
|
||||
97
sites/orgdocs/docs/designs/lucy/readme.mdx
Normal file
97
sites/orgdocs/docs/designs/lucy/readme.mdx
Normal file
|
|
@ -0,0 +1,97 @@
|
|||
---
|
||||
title: "Lucy: FreeSewing's Lucy Tie-On Pocket"
|
||||
sidebar_label: Lucy Tie-On Pocket
|
||||
---
|
||||
|
||||
<DesignInfo design="lucy" />
|
||||
|
||||
## Designer Notes {#notes}
|
||||
|
||||
This is a 18th century pocket pattern based on the hanging pocket in Patterns
|
||||
of Fashion 1 pp. 73. I made it so people could have a historical pocket pattern
|
||||
that is easily adjustable.
|
||||
|
||||
I would like historical patterns and resources to be more accessible to people
|
||||
so the documentation has some historical context and suggestions on
|
||||
historically accurate ways to make it, but its just as awesome to see people
|
||||
make wild modern versions.
|
||||
|
||||
Zee
|
||||
|
||||
:::tip Historical context
|
||||
|
||||
Tie-on pockets like Lucy were worn roughly from the mid-seventeenth (1650s)
|
||||
century until the end of the 19th century (1890s). They came in all shapes and
|
||||
sizes but Lucy is based on an 18th century example.
|
||||
|
||||
They were worn and used by all members of society and were mainly womens wear
|
||||
as men had a variety of pockets sewn into their clothing.
|
||||
|
||||
Pockets would be tied around the waist and could be accessed through a slit in
|
||||
skirts and petticoats. Where the pocket would be in between the layers was up
|
||||
to the individual. If it was hidden in between layers that would provide more
|
||||
security, but hinder accessibility. People who worked in trade often wore their
|
||||
pockets on the outside of their garments entirely, for easy access.
|
||||
|
||||
(Tie-on) Pockets were used alongside patch pockets, sewn in pockets, bags and
|
||||
other ways to carry your things. Sometimes they even had additional pockets
|
||||
hidden inside them!
|
||||
|
||||
If you want to learn more you can read: Burman, B. & Fennetaux A. (2020) _The
|
||||
Pocket, A Hidden History of Women's Lives_ Yale University Press, London
|
||||
:::
|
||||
|
||||
## What You Need {#needs}
|
||||
|
||||
To make Lucy, you will need the following:
|
||||
|
||||
- [Basic sewing supplies](/docs/sewing/basic-sewing-supplies)
|
||||
- About 0.5 meters (0.6 yards) of suitable fabric (see [Fabric
|
||||
Options](#fabric)
|
||||
- About 0.5 meters (0.6 yards) of fabric if using a lining
|
||||
- About 2 meters (2.2 yards) of bias binding or strips of fabric if binding the
|
||||
edges
|
||||
- A length of tape that you can tie around your waist to make the ties with
|
||||
|
||||
:::tip Piecing is Period!
|
||||
|
||||
Pockets like these do not need to be made out of whole pieces of fabric, you
|
||||
can piece together scraps into a large enough piece to cut your pocket pattern
|
||||
out of. Neither do both sides need to be made out of the same fabric.
|
||||
:::
|
||||
|
||||
## Fabric Options {#fabric}
|
||||
|
||||
Because pockets were worn by people in every layer of society historically what
|
||||
they were made out of varied intensely. Some were made out of sturdy and plain
|
||||
fabrics, marked with the owners initials. Others were made out of lavish silks
|
||||
or richly embroidered.
|
||||
|
||||
As such when it comes to fabric options the world is your oyster.
|
||||
|
||||
- Modern prints make fun modern pockets
|
||||
- Use a plain cotton or linen for a more historical option
|
||||
- Have a lot of scraps? Make a patchwork pocket!
|
||||
- Pockets were often a first embroidery project, so go wild if you want to
|
||||
|
||||
The one thing to keep in mind is how stable your fabric is. If it is not very
|
||||
stable or you think it won’t hold very much weight, you can add a lining.
|
||||
|
||||
Additionally, if you are handsewing your pocket it is worth picking a fabric
|
||||
that isn’t too thick or heavy.
|
||||
|
||||
Your binding doesn’t have to be the same colour as the main fabric either. You
|
||||
can use it to add a fun accent, or make your pocket fancier. Bias binding
|
||||
curves easier around any curves, but you can just as easily use strips of
|
||||
fabric as a more waste conscious option.
|
||||
|
||||
The ties can be made from self fabric, or you can use something like a twill
|
||||
tape instead.
|
||||
|
||||
As always, whether you want to stick to historical practices or make something
|
||||
modern is entirely up to you!
|
||||
|
||||
## Cutting Instructions {#cutting}
|
||||
|
||||
- Cut **2 pocket** parts
|
||||
- Cut pocket slit into **1 pocket** part
|
||||
|
|
@ -15,7 +15,7 @@ import { capitalize, optionsMenuStructure, optionType } from '../src/lib/utils.m
|
|||
* Run 'npm run prestart' to force it, or it will happen automatically
|
||||
* when you run `npm run start`
|
||||
*/
|
||||
const skip = ['charlie', 'diana', 'holmes', 'huey', 'jane', 'lucy', 'titan']
|
||||
const skip = ['charlie', 'diana', 'huey', 'titan']
|
||||
|
||||
/*
|
||||
* mkdir helper
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue