Merge branch 'develop' of github.com:freesewing/freesewing into develop

markdown/org/docs/patterns/brian/cutting/de.md

@@ -1,8 +1,16 @@
-Um Brian zu machen, brauchst du:
+**Main fabric**
 
- - 1 Front
+ - Cut **1 Front** part on the fold.
- - 1 Zurück
+ - Cut **1 Back** part on the fold.
- - 2 Ärmel
+ - Cut **2 Sleeve** parts.
+
+These cutting instructions are just for the default Brian block. Adjust your cutting accordingly if you have/are making changes to the block.
+
+<Tip>
+
+If you do not have someone to help pin you into Brian then you may find it easier to Cut 2 Front parts with seam allowance and sew the backs up when constructing so you can pin in the front.
+
+</Tip>
 
 <Note>
 

markdown/org/docs/patterns/brian/cutting/es.md

@@ -1,8 +1,16 @@
-Para hacer Brian, necesitarás:
+**Main fabric**
 
- - 1 frente
+ - Cut **1 Front** part on the fold.
- - 1 Volver
+ - Cut **1 Back** part on the fold.
- - 2 Mangas
+ - Cut **2 Sleeve** parts.
+
+These cutting instructions are just for the default Brian block. Adjust your cutting accordingly if you have/are making changes to the block.
+
+<Tip>
+
+If you do not have someone to help pin you into Brian then you may find it easier to Cut 2 Front parts with seam allowance and sew the backs up when constructing so you can pin in the front.
+
+</Tip>
 
 <Note>
 

markdown/org/docs/patterns/brian/cutting/fr.md

@@ -1,8 +1,16 @@
-Pour le haut Brian, vous aurez besoin de :
+**Main fabric**
 
- - 1 devant
+ - Cut **1 Front** part on the fold.
- - 1 dos
+ - Cut **1 Back** part on the fold.
- - 2 manches
+ - Cut **2 Sleeve** parts.
+
+These cutting instructions are just for the default Brian block. Adjust your cutting accordingly if you have/are making changes to the block.
+
+<Tip>
+
+If you do not have someone to help pin you into Brian then you may find it easier to Cut 2 Front parts with seam allowance and sew the backs up when constructing so you can pin in the front.
+
+</Tip>
 
 <Note>
 

markdown/org/docs/patterns/brian/cutting/nl.md

@@ -1,8 +1,16 @@
-Om Brian te maken, moet je:
+**Main fabric**
 
- - 1 voorzijde
+ - Cut **1 Front** part on the fold.
- - 1 Achterzijde
+ - Cut **1 Back** part on the fold.
- - 2 mouwen
+ - Cut **2 Sleeve** parts.
+
+These cutting instructions are just for the default Brian block. Adjust your cutting accordingly if you have/are making changes to the block.
+
+<Tip>
+
+If you do not have someone to help pin you into Brian then you may find it easier to Cut 2 Front parts with seam allowance and sew the backs up when constructing so you can pin in the front.
+
+</Tip>
 
 <Note>
 

markdown/org/docs/patterns/brian/fabric/de.md

@@ -1,3 +1,7 @@
+If you are making a default Brian to see how it fits we recommend a fabric such as **Calico (Muslin)** or a cheaper fabric that matches the drape and stretch of the fabric you intend to make a finalised version of Breanna with.
+
+You can use scraps of fabrics from your stash so don't worry about buying fabric specifically for Brian.
+
 <Note>
 
 ###### Brian ist ein Block, kein Muster

markdown/org/docs/patterns/brian/fabric/es.md

@@ -1,3 +1,7 @@
+If you are making a default Brian to see how it fits we recommend a fabric such as **Calico (Muslin)** or a cheaper fabric that matches the drape and stretch of the fabric you intend to make a finalised version of Breanna with.
+
+You can use scraps of fabrics from your stash so don't worry about buying fabric specifically for Brian.
+
 <Note>
 
 ###### Brian es un bloque, no un patrón

markdown/org/docs/patterns/brian/fabric/fr.md

@@ -1,3 +1,7 @@
+If you are making a default Brian to see how it fits we recommend a fabric such as **Calico (Muslin)** or a cheaper fabric that matches the drape and stretch of the fabric you intend to make a finalised version of Breanna with.
+
+You can use scraps of fabrics from your stash so don't worry about buying fabric specifically for Brian.
+
 <Note>
 
 ###### Brian est un patron de base.

markdown/org/docs/patterns/brian/fabric/nl.md

@@ -1,3 +1,7 @@
+If you are making a default Brian to see how it fits we recommend a fabric such as **Calico (Muslin)** or a cheaper fabric that matches the drape and stretch of the fabric you intend to make a finalised version of Breanna with.
+
+You can use scraps of fabrics from your stash so don't worry about buying fabric specifically for Brian.
+
 <Note>
 
 ###### Brian is een blok, geen patroon

markdown/org/docs/patterns/brian/instructions/de.md

@@ -5,6 +5,65 @@
 Ein Grundschnitt ist eine Grundform, auf der andere Schnittmuster basieren.
 Sie werden manchmal auch als Schläger bezeichnet, obwohl Puristen argumentieren, dass ein Block und ein Schläger verschiedene Dinge sind.
 
-Grundschnitte werden in der Regel nicht so gemacht, wie sie sind, sondern dienen als Grundlage für andere Schnittmuster.
+Blocks are typically not made as-is but rather serve as a basis for other patterns so the instructions below will not go in depth about closures or finishes and are for the default Brian block.
 
 </Note>
+
+### Step 1: Mock-up Construction
+
+- Sew the front to the backs at the shoulders good sides together.
+- Matching notches, sew the sleeves to the shoulder good sides together.
+- Sew the side seams good sides together.
+
+<Note>
+
+You may need to leave the bottom of sleeve side seams open to put the garment on.
+
+</Note>
+
+<Tip>
+
+If you are making adjustments you may wish to sew the seams wrong sides together to make them easier to adjust.
+
+</Tip>
+
+### Step 2: Try it on
+
+- Try it on and check the fit by pinning the back closed whilst wearing it.
+- Make any alterations and try it on again.
+- Repeat until you are happy.
+
+<Tip>
+
+If you do not have someone to help with pinning, you may find it easier to cut the front part in two with seam allowance rather than on a fold and sew the back seam up so that you can pin in the front when trying on.  
+
+Keep an eye out for anything you keep doing whilst wearing the mock-up, are you pulling it down? Constantly adjusting the shoulder? etc. Things like these are signs of where the pattern may need adjusting.  
+
+Sometimes you may need to wear the mock-up for an extended amount of time to get a better sense of the fit so don't be afraid to walk around in it for a couple of hours.
+
+</Tip>
+
+<Note>
+  
+Remember to treat Brian as a basis rather than a final product, so adjust what you need to get the desired look.  
+For instance:
+- Change the neck line
+- Add/change the closure allowances  
+- Add a collar
+
+It is all up to you! Experiment and go forth!
+
+</Note>
+
+### Step 3: Make a paper pattern
+
+- Once happy with all your changes unpick your mockup and make a paper pattern based off of it.
+- Now you have a pattern you can use to produce a garment.
+
+<Note>
+
+It is best practice to make a paper pattern from the mock-up if you have made any alterations, as this will allow you to clean up any lines but also means you have a pattern that you can keep producing garments from.
+
+</Note>
+
+

markdown/org/docs/patterns/brian/instructions/es.md

@@ -5,6 +5,65 @@
 Un bloque es una forma básica en la que se basan otros patrones.
 A veces también se llaman trampas, aunque los puristas argumentarán que un bloque y una inclinación son cosas diferentes.
 
-Los bloques normalmente no se hacen as-is sino que sirven como base para otros patrones.
+Blocks are typically not made as-is but rather serve as a basis for other patterns so the instructions below will not go in depth about closures or finishes and are for the default Brian block.
 
 </Note>
+
+### Step 1: Mock-up Construction
+
+- Sew the front to the backs at the shoulders good sides together.
+- Matching notches, sew the sleeves to the shoulder good sides together.
+- Sew the side seams good sides together.
+
+<Note>
+
+You may need to leave the bottom of sleeve side seams open to put the garment on.
+
+</Note>
+
+<Tip>
+
+If you are making adjustments you may wish to sew the seams wrong sides together to make them easier to adjust.
+
+</Tip>
+
+### Step 2: Try it on
+
+- Try it on and check the fit by pinning the back closed whilst wearing it.
+- Make any alterations and try it on again.
+- Repeat until you are happy.
+
+<Tip>
+
+If you do not have someone to help with pinning, you may find it easier to cut the front part in two with seam allowance rather than on a fold and sew the back seam up so that you can pin in the front when trying on.  
+
+Keep an eye out for anything you keep doing whilst wearing the mock-up, are you pulling it down? Constantly adjusting the shoulder? etc. Things like these are signs of where the pattern may need adjusting.  
+
+Sometimes you may need to wear the mock-up for an extended amount of time to get a better sense of the fit so don't be afraid to walk around in it for a couple of hours.
+
+</Tip>
+
+<Note>
+  
+Remember to treat Brian as a basis rather than a final product, so adjust what you need to get the desired look.  
+For instance:
+- Change the neck line
+- Add/change the closure allowances  
+- Add a collar
+
+It is all up to you! Experiment and go forth!
+
+</Note>
+
+### Step 3: Make a paper pattern
+
+- Once happy with all your changes unpick your mockup and make a paper pattern based off of it.
+- Now you have a pattern you can use to produce a garment.
+
+<Note>
+
+It is best practice to make a paper pattern from the mock-up if you have made any alterations, as this will allow you to clean up any lines but also means you have a pattern that you can keep producing garments from.
+
+</Note>
+
+

markdown/org/docs/patterns/brian/instructions/fr.md

@@ -5,6 +5,65 @@
 Un patron de base est une forme basique de laquelle on part pour créer d'autres patrons.
 Ils sont parfois aussi appelés patrons de base, bien que les puristes soutiennent qu'un bloc et un patron de base sont des choses différentes.
 
-Les patrons de base ne sont donc généralement pas utilisés tels quels, mais plutôt pour élaborer d'autres modèles.
+Blocks are typically not made as-is but rather serve as a basis for other patterns so the instructions below will not go in depth about closures or finishes and are for the default Brian block.
 
 </Note>
+
+### Step 1: Mock-up Construction
+
+- Sew the front to the backs at the shoulders good sides together.
+- Matching notches, sew the sleeves to the shoulder good sides together.
+- Sew the side seams good sides together.
+
+<Note>
+
+You may need to leave the bottom of sleeve side seams open to put the garment on.
+
+</Note>
+
+<Tip>
+
+If you are making adjustments you may wish to sew the seams wrong sides together to make them easier to adjust.
+
+</Tip>
+
+### Step 2: Try it on
+
+- Try it on and check the fit by pinning the back closed whilst wearing it.
+- Make any alterations and try it on again.
+- Repeat until you are happy.
+
+<Tip>
+
+If you do not have someone to help with pinning, you may find it easier to cut the front part in two with seam allowance rather than on a fold and sew the back seam up so that you can pin in the front when trying on.  
+
+Keep an eye out for anything you keep doing whilst wearing the mock-up, are you pulling it down? Constantly adjusting the shoulder? etc. Things like these are signs of where the pattern may need adjusting.  
+
+Sometimes you may need to wear the mock-up for an extended amount of time to get a better sense of the fit so don't be afraid to walk around in it for a couple of hours.
+
+</Tip>
+
+<Note>
+  
+Remember to treat Brian as a basis rather than a final product, so adjust what you need to get the desired look.  
+For instance:
+- Change the neck line
+- Add/change the closure allowances  
+- Add a collar
+
+It is all up to you! Experiment and go forth!
+
+</Note>
+
+### Step 3: Make a paper pattern
+
+- Once happy with all your changes unpick your mockup and make a paper pattern based off of it.
+- Now you have a pattern you can use to produce a garment.
+
+<Note>
+
+It is best practice to make a paper pattern from the mock-up if you have made any alterations, as this will allow you to clean up any lines but also means you have a pattern that you can keep producing garments from.
+
+</Note>
+
+

markdown/org/docs/patterns/brian/instructions/nl.md

@@ -5,6 +5,65 @@
 Een blok is een basisvorm waarop andere patronen zijn gebaseerd.
 Dit wordt soms ook een paspatroon genoemd, alhoewel puristen zeggen dat dit twee verschillende dingen zijn.
 
-Blokken worden meestal niet gemaakt zoals is, maar dienen als basis voor andere patronen.
+Blocks are typically not made as-is but rather serve as a basis for other patterns so the instructions below will not go in depth about closures or finishes and are for the default Brian block.
 
 </Note>
+
+### Step 1: Mock-up Construction
+
+- Sew the front to the backs at the shoulders good sides together.
+- Matching notches, sew the sleeves to the shoulder good sides together.
+- Sew the side seams good sides together.
+
+<Note>
+
+You may need to leave the bottom of sleeve side seams open to put the garment on.
+
+</Note>
+
+<Tip>
+
+If you are making adjustments you may wish to sew the seams wrong sides together to make them easier to adjust.
+
+</Tip>
+
+### Step 2: Try it on
+
+- Try it on and check the fit by pinning the back closed whilst wearing it.
+- Make any alterations and try it on again.
+- Repeat until you are happy.
+
+<Tip>
+
+If you do not have someone to help with pinning, you may find it easier to cut the front part in two with seam allowance rather than on a fold and sew the back seam up so that you can pin in the front when trying on.  
+
+Keep an eye out for anything you keep doing whilst wearing the mock-up, are you pulling it down? Constantly adjusting the shoulder? etc. Things like these are signs of where the pattern may need adjusting.  
+
+Sometimes you may need to wear the mock-up for an extended amount of time to get a better sense of the fit so don't be afraid to walk around in it for a couple of hours.
+
+</Tip>
+
+<Note>
+  
+Remember to treat Brian as a basis rather than a final product, so adjust what you need to get the desired look.  
+For instance:
+- Change the neck line
+- Add/change the closure allowances  
+- Add a collar
+
+It is all up to you! Experiment and go forth!
+
+</Note>
+
+### Step 3: Make a paper pattern
+
+- Once happy with all your changes unpick your mockup and make a paper pattern based off of it.
+- Now you have a pattern you can use to produce a garment.
+
+<Note>
+
+It is best practice to make a paper pattern from the mock-up if you have made any alterations, as this will allow you to clean up any lines but also means you have a pattern that you can keep producing garments from.
+
+</Note>
+
+

markdown/org/docs/patterns/brian/needs/de.md

@@ -1,3 +1,10 @@
+To make Brian, you will need the following:
+
+- Basic sewing supplies
+- About 1.25 - 1.5 metres of a suitable fabric ([see Brian Fabric options](/docs/patterns/brian/fabric/))
+
+This list is for a default Brian Block. If you have/are making changes to the block you may need to get additional items such as closures, binding etc.
+
 <Note>
 
 ###### Brian ist ein Block, kein Muster
@@ -8,4 +15,3 @@ Sie werden manchmal auch als Schläger bezeichnet, obwohl Puristen argumentieren
 Grundschnitte werden in der Regel nicht so gemacht, wie sie sind, sondern dienen als Grundlage für andere Schnittmuster.
 
 </Note>
-

markdown/org/docs/patterns/brian/needs/es.md

@@ -1,3 +1,10 @@
+To make Brian, you will need the following:
+
+- Basic sewing supplies
+- About 1.25 - 1.5 metres of a suitable fabric ([see Brian Fabric options](/docs/patterns/brian/fabric/))
+
+This list is for a default Brian Block. If you have/are making changes to the block you may need to get additional items such as closures, binding etc.
+
 <Note>
 
 ###### Brian es un bloque, no un patrón
@@ -8,4 +15,3 @@ A veces también se llaman trampas, aunque los puristas argumentarán que un blo
 Los bloques normalmente no se hacen as-is sino que sirven como base para otros patrones.
 
 </Note>
-

markdown/org/docs/patterns/brian/needs/fr.md

@@ -1,3 +1,10 @@
+To make Brian, you will need the following:
+
+- Basic sewing supplies
+- About 1.25 - 1.5 metres of a suitable fabric ([see Brian Fabric options](/docs/patterns/brian/fabric/))
+
+This list is for a default Brian Block. If you have/are making changes to the block you may need to get additional items such as closures, binding etc.
+
 <Note>
 
 ###### Brian est un patron de base.
@@ -8,4 +15,3 @@ Ils sont parfois aussi appelés patrons de base, bien que les puristes soutienne
 Les patrons de base ne sont donc généralement pas utilisés tels quels, mais plutôt pour élaborer d'autres modèles.
 
 </Note>
-

markdown/org/docs/patterns/brian/needs/nl.md

@@ -1,3 +1,10 @@
+To make Brian, you will need the following:
+
+- Basic sewing supplies
+- About 1.25 - 1.5 metres of a suitable fabric ([see Brian Fabric options](/docs/patterns/brian/fabric/))
+
+This list is for a default Brian Block. If you have/are making changes to the block you may need to get additional items such as closures, binding etc.
+
 <Note>
 
 ###### Brian is een blok, geen patroon
@@ -8,4 +15,3 @@ Dit wordt soms ook een paspatroon genoemd, alhoewel puristen zeggen dat dit twee
 Blokken worden meestal niet gemaakt zoals is, maar dienen als basis voor andere patronen.
 
 </Note>
-

markdown/org/docs/patterns/charlie/options/crossseamcurveangle/de.md

@@ -1,11 +1,6 @@
-- - -
-- - -
 
-<Fixme>
+Controls the angle of the cross seam curve.
 
-Dokumentation fehlt
-
-</Fixme>
 
 ## Effekt dieser Option auf das Schnittmuster
-![Dieses Bild zeigt den Effekt dieser Option, indem es mehrere Varianten überlagert, die einen anderen Wert für diese Option haben](charlie_crossseamcurveangle_sample.svg "Effekt dieser Option auf das Schnittmuster")
+![This image shows the effect of this option by superimposing several variants that have a different value for this option](charlie_crossseamcurveangle_sample.svg "Effect of this option on the pattern")

markdown/org/docs/patterns/charlie/options/crossseamcurveangle/es.md

@@ -1,11 +1,6 @@
-- - -
-- - -
 
-<Fixme>
+Controls the angle of the cross seam curve.
 
-Falta la documentación
-
-</Fixme>
 
 ## Efecto de esta opción en el patrón
-![Esta imagen muestra el efecto de esta opción superponiendo varias variantes que tienen un valor diferente para esta opción](charlie_crossseamcurveangle_sample.svg "Efecto de esta opción en el patrón")
+![This image shows the effect of this option by superimposing several variants that have a different value for this option](charlie_crossseamcurveangle_sample.svg "Effect of this option on the pattern")

markdown/org/docs/patterns/charlie/options/crossseamcurveangle/fr.md

@@ -1,11 +1,6 @@
-- - -
-- - -
 
-<Fixme>
+Controls the angle of the cross seam curve.
 
-Documentation manquante
-
-</Fixme>
 
 ## Effet de cette option sur le motif
-![Cette image montre l'effet de cette option en superposant plusieurs variantes qui ont une valeur différente pour cette option](charlie_crossseamcurveangle_sample.svg "Effet de cette option sur le motif")
+![This image shows the effect of this option by superimposing several variants that have a different value for this option](charlie_crossseamcurveangle_sample.svg "Effect of this option on the pattern")

markdown/org/docs/patterns/charlie/options/crossseamcurveangle/nl.md

@@ -1,11 +1,6 @@
-- - -
-- - -
 
-<Fixme>
+Controls the angle of the cross seam curve.
 
-Documentatie ontbreekt
-
-</Fixme>
 
 ## Effect van deze optie op het patroon
-![Deze afbeelding toont het effect van deze optie door meerdere varianten die een andere waarde hebben voor deze optie te vervangen](charlie_crossseamcurveangle_sample.svg "Effect van deze optie op het patroon")
+![This image shows the effect of this option by superimposing several variants that have a different value for this option](charlie_crossseamcurveangle_sample.svg "Effect of this option on the pattern")

markdown/org/docs/patterns/charlie/options/crotchseamcurveangle/de.md

@@ -1,11 +1,6 @@
-- - -
-- - -
 
-<Fixme>
+Controls the angle of the crotch seam curve.
 
-Dokumentation fehlt
-
-</Fixme>
 
 ## Effekt dieser Option auf das Schnittmuster
-![Dieses Bild zeigt den Effekt dieser Option, indem es mehrere Varianten überlagert, die einen anderen Wert für diese Option haben](charlie_crotchseamcurveangle_sample.svg "Effekt dieser Option auf das Schnittmuster")
+![This image shows the effect of this option by superimposing several variants that have a different value for this option](charlie_crotchseamcurveangle_sample.svg "Effect of this option on the pattern")

markdown/org/docs/patterns/charlie/options/crotchseamcurveangle/es.md

@@ -1,11 +1,6 @@
-- - -
-- - -
 
-<Fixme>
+Controls the angle of the crotch seam curve.
 
-Falta la documentación
-
-</Fixme>
 
 ## Efecto de esta opción en el patrón
-![Esta imagen muestra el efecto de esta opción superponiendo varias variantes que tienen un valor diferente para esta opción](charlie_crotchseamcurveangle_sample.svg "Efecto de esta opción en el patrón")
+![This image shows the effect of this option by superimposing several variants that have a different value for this option](charlie_crotchseamcurveangle_sample.svg "Effect of this option on the pattern")

markdown/org/docs/patterns/charlie/options/crotchseamcurveangle/fr.md

@@ -1,11 +1,6 @@
-- - -
-- - -
 
-<Fixme>
+Controls the angle of the crotch seam curve.
 
-Documentation manquante
-
-</Fixme>
 
 ## Effet de cette option sur le motif
-![Cette image montre l'effet de cette option en superposant plusieurs variantes qui ont une valeur différente pour cette option](charlie_crotchseamcurveangle_sample.svg "Effet de cette option sur le motif")
+![This image shows the effect of this option by superimposing several variants that have a different value for this option](charlie_crotchseamcurveangle_sample.svg "Effect of this option on the pattern")

markdown/org/docs/patterns/charlie/options/crotchseamcurveangle/nl.md

@@ -1,11 +1,6 @@
-- - -
-- - -
 
-<Fixme>
+Controls the angle of the crotch seam curve.
 
-Documentatie ontbreekt
-
-</Fixme>
 
 ## Effect van deze optie op het patroon
-![Deze afbeelding toont het effect van deze optie door meerdere varianten die een andere waarde hebben voor deze optie te vervangen](charlie_crotchseamcurveangle_sample.svg "Effect van deze optie op het patroon")
+![This image shows the effect of this option by superimposing several variants that have a different value for this option](charlie_crotchseamcurveangle_sample.svg "Effect of this option on the pattern")