5.6 KiB
title: "Waralee wrap pants: Sewing Instructions"
The key to Waralee is the waist band
In a way, Waralee is just a waist band with a long piece of fabric attached. The waist band needs to continue from the fabric into two strings of fabric that are used to tie the pants in the front and two in the back. These strings are not included in the pattern. Traditionally, they are of similar length. You can make longer ones for the front panel (the side that is a little shorter than the other, on the left in the illustrations below), to allow you to tie both sets in the front. I prefer this as it is easier to tie, and you don't have the bulk of the knot in the back.
Step 1: Sew the pockets
Pockets are optional
Traditionally, these types of pants do not have pockets. Pero quiero poner mi teléfono, llaves y monedero en algún lugar. Así que he incluido bolsillos en el patrón. Usted puede decidir por sí mismo si lo desea en sus pantalones.
Las ilustraciones en los siguientes pasos muestran los pantalones de Waralee sin bolsillos. Sólo se muestran las colocaciones de los bolsillos del patrón, para ayudarte a orientarte a ti mismo.
If you do want pockets, make them first
If you're going to make the pockets, make them before putting one piece of fabric on the other. Es más fácil trabajar con las piezas aún separadas.
- If desired, sew the pockets.
I included placements for the front pockets that will be hidden by the flaps in the front. But they will still be easily accessible to put your phone or keys in. These are single welt pockets. The ones in the front are at an angle and the ones in the back are horizontally oriented. The pocket templates should allow for enough fabric to attach the pocket to the waistband. If you want particularly deep pockets, please adjust accordingly.
Explain how to sew the pockets more.
Step 2: Hem the sides and bottom
- Hem the sides
- Hem the bottom.
You can use whatever method works best for you. In the version I first made I just serged the sides, folded them back and top stitched them, then did the same for the bottom. I did this to keep the bulk of the fabric to a minimum and allow for a better drape. What you do should depend on the type of fabric you're using.
Step 3: Sew the two pants parts together at the crotch
Now you get to sew the two pants parts together.
- Lay the two pants parts on top of one another with good sides together and sew the seam along the cutout.
- Finish this seam and press it.
Step 4: Prepare the four strings
The strings are just long tubes of fabric.
- Take a quarter of your waist measurement. Add that number to 40cm (17”). Add your seam allowance. This is the length of each string.
- Cut out four strips of fabric that are that long and 5cm (2”) wide.
For example, if my waist circumference is 84.6cm: 84.6cm divided by 4 is 21.2cm. 21.2cm plus 40cm is 61.2cm. 61.2cm plus my seam allowance of 1cm is 62.2cm. I will cut four strips of fabric that are 62.2cm by 5cm.
You can lengthen the front ties
Optionally, to make the front ties longer, extend them by your quarter waist measurement.
When generating your pattern, one of the style options is called “Waist Band”. The strings, when folded, should have the same width as you specified for that option, 2.5cm (1") by default.
The extra 40cm (17") of length is to make the knot.
If your material is delicate or flimsy, you can add some interfacing to this to give it strength.
- Fold them in half along the long side, good sides together.
- Stitch the long side and one of the short sides,
- Turn the tie right side out.
Voltear tubos de tela hacia afuera puede ser difícil
Esto se puede hacer más fácil tomando una pieza de twine más larga que las cajas. Diga esto entre los lados derecho, a lo largo del pliegue. Asegúrese de capturar esto mientras coser el lado corto. Puedes usar esto para tirar el extremo a través del tubo que has creado. Cuando hayas terminado, puedes cortarlo. Tener un palo largo o un volteador de bucle puede ayudar también con esto.
Step 5: Sew the waist band
Now it is time to sew the waist band.
- If your fabric is delicate, add interfacing to the wrong side of the pants above the waist band line. (red)
- Fold the seam allowance in, and then fold along the waist band line. (red)
- Insert one of the strings you made in the previous step on each side.
- Sew along the waist band line, and add some additional stitching to make sure those strings are attached well. (blue)
Secure the strings well
The strings keep your pants up, so having that stitching fail will result in awkward moments.
Step 6: Wear your pants
Press your pants, and try them on!
Hold the front side against your belly and wrap both strings around you and tie in the back (or, if you have long strings, wrap them all the way around you and tie in the front). Then hand the back side through your legs to yourself and tie the other strings in the front.
Here is an article demonstrating how to tie wrap pants: How to Tie Wrap Pants
If you get stuck, or have additional questions, you can always reach out to other FreeSewers.