4.1 KiB
Imágenes próximamente
Estas instrucciones son un trabajo en curso, y aún no hemos creado las ilustraciones. Se añadirán pronto.
Paso 1: Únete a la espalda
Coloque sus dos espaldas encima de la otra con los lados buenos juntos, y coser juntos a lo largo de la costura trasera del centro.
Paso 2: Únete a los frentes
Marcar la costura frontal
Ponga dos de sus frentes en la parte superior con los lados buenos juntos, y coser juntos a lo largo de la costura frontal del centro.
Repita con los otros dos frentes para que tenga dos conjuntos idénticos.
Bastear frentes juntos
Tenemos 4 frentes porque tendremos una doble capa en la parte delantera de nuestros troncos de natación.
Since swimwear fabric tends to be slippery, it's a good idea to baste your fronts together to make it easier to work with them in the next steps.
So place your fronts on top of each other, with good sides out, and sew them together with some large basting stitches in the seam allowance.
Paso 3: Únete a los lados
Coloque la espalda hacia abajo con el lado bueno arriba, y coloque su doble capa frontal en la parte superior. Difundir frentes y volver juntos en las costuras laterales.
Paso 4: Aplasta las costuras de cruz
Keep your swim trunks with the good side inwards (the back at least, the front has good side on both sides) and sew the crossseam to create the leg openings.
Paso 5: Coloca los eyelets para la cadena de dibujo
Marca la mitad de la longitud de tu cintura. Fold the waistband double, and mark the middle of the width (do not take the seam allowance into account).
Un poco a la izquierda y a la derecha de esto, puede añadir dos eyelets para pasar una cuerda de dibujo. This will avoid an embarassing situation when you go for that big dive and now suddenly find your swim trunks on your ankles.
Es mejor añadir refuerzos
As swimwear fabric is slippery and thin, you might want to add some reinforcement behind these eyelets. Un pedazo restante de denim funcionará bien.
Paso 6: Prepara el elástico
No hay una fórmula mágica para la longitud de tu elástico. So you wrap it around your waist and pull it tight until you get a good fit.
Marca esta longitud, corta el elástico y únete a los dos extremos.
Paso 7: Únete a la cintura
Doblar la cintura a la mitad con los lados buenos juntos y la línea de los bordes (corto). Los espolvorean juntos.
Paso 8: Adjuntar la cintura
Doblar la cintura doble a lo largo de la longitud con buenos lados hacia afuera, y colocar el elástico dentro. Asegúrate de alinear el lugar donde se une el elástico con el lugar donde se une la cintura.
Align the back of your swim trunks with the place where you joined the waistband, align the edge of the waistband with the edge of the back, and pin them together. Asegúrate de fijarlo en el lado malo de la espalda.
Ten en cuenta tus eyelets
If you've made eyelets in your waistband, double check that they are placed towards the outside, not the inside of your waistband.
Find the front of the waistband (easy if there's eyelets, if not just fold it double) and align that with the front seam. Anclar esto también en su lugar.
Ahora pasea por la cintura de los troncos de natación, fijando la cintura en su lugar.
Then, sew the waistband to the swim trunks, as close to the the elastic as you can, but don't sew into the elastic.
It's fine to not sew too close the first time around, and once your elastic is attached and encased, make a second round to sew it a bit more snugly.
Paso 9: Hem las piernas
Doble la lluvia hacia arriba, y coser hacia abajo. Si tienes una cubierta, úsala. Si no es así, utilice una aguja gemela o una stitch zig-zag para mantener la costura estirable.
Doble sólo una vez, para evitar el grueso
La tela de traje de baño no se cuelga, así que puedes doblar esto una vez y coser la tela, luego recortar la tela.
Paso 10: Hilo de dibujar una cuerda alrededor de la cintura
Hile un hilo de dibujo a través de un eyelet, alrededor de la cintura, y fuera del otro eyelet.
Eso es así, ya has hecho :Budgets_up: