3.9 KiB
title: "Shin swim trunks: Sewing Instructions"
Prentjes zijn onderweg
Deze instructies zijn een work in progress, en we hebben de illustraties nog niet gemaakt. We voegen ze binnenkort toe.
Stap 1: Achternaad
Put your two backs on top of each other with the good sides together, and sew them together allong the center back seam.
Stap 2: Voornaad
Naai de voornaad
Put two of your fronts on top of each other with the good sides together, and sew them together allong the center front seam.
Repeat with the two other fronts so you have two identical sets.
Drieg de voorpanden samen
We have 4 fronts because we'll have a double layer at the front of our swim trunks.
Since swimwear fabric tends to be slippery, it's a good idea to baste your fronts together to make it easier to work with them in the next steps.
So place your fronts on top of each other, with good sides out, and sew them together with some large basting stitches in the seam allowance.
Stap 3: Naai de zijnaden
Place your back down with the good side up, and place your double front layer on top. Sew fronts and back together at the side seams.
Stap 4: Stik de kruisnaad
Keep your swim trunks with the good side inwards (the back at least, the front has good side on both sides) and sew the crossseam to create the leg openings.
Stap 5: Plaats vetergaatjes voor het koord
Mark the middle of your waistband length. Fold the waistband double, and mark the middle of the width (do not take the seam allowance into account).
A bit to the left and right of this, you can add two eyelets to pass a drawstring through. This will avoid an embarassing situation when you go for that big dive and now suddenly find your swim trunks on your ankles.
Verstevigen is een goed idee
Aangezien badpakstof dun en glad is, is het geen slecht idee om een beetje versteviging achter de vetergaatjes toe te voegen. Een restje jeans werkt perfect.
Stap 6: Bereid het elastiek voor
There's no magic formula for the length of your elastic. So you wrap it around your waist and pull it tight until you get a good fit.
Mark this length, cut the elastic, and join the two ends together.
Stap 7: Naai de tailleband
Fold the waistband in half with good sides together and line of the (short) edges. Sew them together.
Stap 8: Bevestig de tailleband
Fold your waistband double along the length with good sides out, and place the elastic inside. Make sure to align the place where the elastic is joined with the place the waistband is joined.
Align the back of your swim trunks with the place where you joined the waistband, align the edge of the waistband with the edge of the back, and pin them together. Make certain that you pin it to the bad side of the back.
Let op je vetergaten
Als je vetergaatjes in je tailleband gemaakt hebt, check dan of ze zeker op de buitenkant van je tailleband staan, en niet aan de binnenkant.
Find the front of the waistband (easy if there's eyelets, if not just fold it double) and align that with the front seam. Pin this in place too.
Now make your way around the swim trunks waist, pinning the waistband in place.
Then, sew the waistband to the swim trunks, as close to the the elastic as you can, but don't sew into the elastic.
It's fine to not sew too close the first time around, and once your elastic is attached and encased, make a second round to sew it a bit more snugly.
Stap 9: Zoom de pijpen
Fold the hem upwards, and sew it down. If you have a coverlock, use it. If not, use a twin needle or zig-zag stitch to keep the seam stretchable.
Vouw maar een keer om een teveel aan stof te vermijden
Badpakstof rafelt niet, dus je kan dit gewoon één keer omplooien en vaststikken, en daarna de rand netjes bijknippen.
Stap 10: Haal een koordje door de tailleband
Thread a drawstring through one eyelet, around the waist, and out of the other eyelet.
That's it, you're done 👍